A direct connect, supersonic solid fuel combustor with a cavity is explored in the context of understanding characteristics related to ignition, regression rate, combustion, and flow fields for application in advancing solid fuel scramjet research. 3D printed, polymethylmethacrylate fuel grains are loaded into both fully enclosed and optically accessible combustors.
The ignition characteristics are investigated by systematically varying the internal geometry of the fuel grain to develop a flammability map with respect to non-dimensional geometric parameters. Results reveal that a longer and larger flameholding cavity creates favorable conditions for ignition and sustained combustion. The inlet temperature is also systematically varied to extend the available literature on the supersonic combustion of solid fuels to lower temperature operating conditions and show that a higher inlet temperature is conducive to sustained combustion and higher regression rates. The regression rates of the fuel grains are measured to determine a concentration of regression in the flameholding cavity along the angle of the downstream side of the cavity. Ignition and sustained combustion rely heavily on the fuel in the flameholding cavity. A decreasing regression rate is observed as the fuel regresses by measuring the regression rate at discrete time intervals during a firing of the optical combustor. The optical combustor is also subject to various high-frequency imaging techniques. Shadowgraph imaging shows the changes in density of the flow field and finds a normal shock in the constant area section. CH* chemiluminescence imaging provides novel observations of the concentrated areas of combustion along the fuel grain wall by highlighting the heat release from combustion. A high intensity of CH* radicals is in the upstream section of the flameholding cavity. When considered in the context of the concentration of regression, this indicates that the recirculation zone pulls fuel from the downstream section of the cavity, combusts it in the upstream section of the flameholding cavity, then expels the higher enthalpy gas into the core flow. Additionally, observing the flow provides insight into the flow dynamics of opposing cavities in a supersonic flow field.
The symmetry of the flow field is found to be reliant on the stability of the flameholding cavity length to depth ratio. / Master of Science / A solid fuel scramjet has the potential to be the simplest and most cost effective method of achieving hypersonic flight. A liquid fuel scramjet has been demonstrated in free flight, but liquid fuels present many issues involving safety and storage that can be eliminated by introducing solid fuels. Supersonic combustion, or burning fuel in an air flow moving faster than the speed of sound, is a complicated subject due to the irregularity of flow fields and the requirement of combustion to occur at a high rate. The research within this thesis presents many novel technologies that have never been presented in published literature in the context of the supersonic combustion of solid fuels. By conducting ground testing of a solid fuel scramjet, characteristics of the combustion can be studied to expand the available literature in the field to new fuel geometries and inlet conditions. The ignition and sustained combustion of a solid fuel scramjet is extremely reliant on the initial geometry of the fuel and the initial temperature of the flow. This research advances the field of supersonic combustion of solid fuels by developing an optically accessible combustor using quartz windows. These characteristics of supersonic combustion are investigated using highspeed video recording. The results of these techniques provide insight into favorable fuel geometries and inlet conditions. Additionally, patterns observed in the flow field explain concentrations of combustion and fuel consumption.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/116685 |
| Date | 22 November 2023 |
| Creators | Schlussel, Ethan Jacob |
| Contributors | Aerospace and Ocean Engineering, Young, Gregory, Massa, Luca, Schetz, Joseph A. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0021 seconds