With the increasing demand for access to the crowded radio frequency spectrum, cognitive radios have been suggested as one solution. Cognitive radios would be frequency agile and able to sense their radio environment and opportunistically use empty spectrum. Spectrum sensing, monitoring a given band of spectrum to see if it is occupied, is an essential part of a cognitive radio. The preferred method of spectrum sensing is the energy detector, which does not require any a priori information about the signal to be detected and is computationally simple to implement. Man-made noise, impulsive in nature, has also become more prevalent with the widespread use of electronic devices. In this thesis, we took measurements of man-made impulsive noise in the broadcast digital television bands to measure its presence, power, and spatial correlation. The effects of impulsive noise on the detection performance of an energy detector were analyzed. Lastly, a wideband RF receiver was designed, built, and tested on the Virginia Tech campus, which would be well suited both to spectrum sensing and taking measurements of impulsive noise. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/35293 |
| Date | 26 October 2012 |
| Creators | DeJarnette, Hunter Archer |
| Contributors | Electrical and Computer Engineering, Buehrer, R. Michael, Ellingson, Steven W., da Silva, Claudio R. C. M. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | DeJarnette_HA_T_2012.pdf |
Page generated in 0.0028 seconds