There has been much recent research on the control of complex sound fields in enclosed vibrating structures via active control techniques. Active Structural Acoustic Control (ASAC) has shown much promise for reducing interior cabin noise in aircraft by applying control forces directly to the fuselage structure. Optimal positioning of force actuators for ASAC presents a challenging problem however, because a detailed knowledge of the structural-acoustic coupling in the fuselage is required.
This work is concerned with the development of a novel experimental technique for examining the forced harmonic vibrations of an aircraft fuselage and isolating the acoustically well-coupled motions that cause significant interior noise. The developed system identification technique is itself based upon an active control system, which is used to approximate the disturbance noise field in the cabin and apply an inverse excitation to the fuselage structure. The resulting shell vibrations are recorded and used to optimally locate piezoelectric (PZT) actuators on the fuselage for ASAC testing.
Experiments for this project made use of a Cessna Citation III aircraft fuselage test rig. Tests were performed at three harmonic disturbance frequencies, including an acoustic resonance, an off-resonance, and a structural resonance case. In all cases, the new system identification technique successfully isolated a simplified, low-magnitude vibration pattern from the total structural response caused by a force disturbance applied at the fuselage's rear engine mount. These measured well-coupled vibration components were used for positioning candidate piezoelectric actuators on the fuselage shell. A genetic algorithm search provided an optimal subset of actuators for use in an ASAC system. ASAC tests confirmed the importance of actuator location, as the optimal sets outperformed alternate groupings in all test cases. In addition, significant global control was achieved, with sound level reductions observed throughout the passenger cabin with virtually no control spillover. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/36876 |
| Date | 04 August 1997 |
| Creators | Paxton, Scott |
| Contributors | Mechanical Engineering, Fuller, Christopher R., Burdisso, Ricardo A., Cudney, Harley H. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | ETD.PDF |
Page generated in 0.0062 seconds