The use of a microbubble dispersion (MBD) for oxygen transport in a yeast fermentation was studied. No surfactants were added to the fermentations; the microbubbles were formed using only the surfactants naturally produced by the yeast. The growth rate of a Saccharomyces cerevisiae culture was found to be almost twice as great for a microbubble dispersion sparged fermentation, as for a gas sparged fermentation when equivalent volumes of air or microbubble dispersion were used. The growth rate of the MBD sparged fermentation was 0.108/hr, as opposed to 0.068/hr for the air sparged fermentation. Oxygen transfer rates were measured by the yield coefficient, dynamic, and direct methods. The oxygen transfer coefficient was found to be approximately 190/hr and independent of the fermenter impeller speed, over the range of 100 - 580 RPM, for the micro bubble dispersion fermentation. Over the same range, the oxygen transfer coefficient for the air sparged fermentation rose from 55 to 132/hr. The power requirements for the fermenter systems were estimated. It was determined that a five fold reduction in the fermenter to MBD generator volume ratio could be made. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/88601 |
| Date | January 1988 |
| Creators | Kaster, Jeffrey Allen |
| Contributors | Chemical Engineering |
| Publisher | Virginia Polytechnic Institute and State University |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | en_US |
| Detected Language | English |
| Type | Thesis, Text |
| Format | ix, 100 leaves, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | OCLC# 18344615 |
Page generated in 0.0017 seconds