There are many types of bio-signals with various control application prospects. This dissertation regards possible application domain of electroencephalographic signal. The implementation of EEG signals, as a source of information used for control of external devices, became recently a growing concern in the scientific world. Application of electroencephalographic signals in Brain-Computer Interfaces (BCI) (variant of Human-Computer Interfaces (HCI)) as an implement, which enables direct and fast communication between the human brain and an external device, has become recently very popular. Currently available on the market, BCI solutions require complex signal processing methodology, which results in the need of an expensive equipment with high computing power. In this work, a study on using various types of EEG equipment in order to apply the most appropriate one was conducted. The analysis of EEG signals is very complex due to the presence of various internal and external artifacts. The signals are also sensitive to disturbances and non-stochastic, what makes the analysis a complicated task. The research was performed on customised (built by the author of this dissertation) equipment, on professional medical device and on Emotiv EPOC headset. This work concentrated on application of an inexpensive, easy to use, Emotiv EPOC headset as a tool for gaining EEG signals. The project also involved application of embedded system platform - TS-7260. That solution caused limits in choosing an appropriate signal processing method, as embedded platforms characterise with a little efficiency and low computing power. That aspect was the most challenging part of the whole work. Implementation of the embedded platform enables to extend the possible future application of the proposed BCI. It also gives more flexibility, as the platform is able to simulate various environments. The study did not involve the use of traditional statistical or complex signal processing methods. The novelty of the solution relied on implementation of the basic mathematical operations. The efficiency of this method was also presented in this dissertation. Another important aspect of the conducted study is that the research was carried out not only in a laboratory, but also in an environment reflecting real-life conditions. The results proved efficiency and suitability of the implementation of the proposed solution in real-life environments. The further study will focus on improvement of the signal-processing method and application of other bio-signals - in order to extend the possible applicability and ameliorate its effectiveness.
|Publisher||University of Greenwich|
|Source Sets||Ethos UK|
|Type||Electronic Thesis or Dissertation|
Page generated in 0.0161 seconds