The demand for cost effective, reliable and safe machinery operation requires accurate fault detection and classification. These issues are of paramount importance as potential failures of rotating and reciprocating machinery can be managed properly and avoided in some cases. Various methods have been applied to tackle these issues, but the accuracy of those methods is variable and leaves scope for improvement. This research proposes appropriate methods for fault detection and diagnosis. The main consideration of this study is use Artificial Intelligence (AI) and related mathematics approaches to build a condition monitoring (CM) system that has incremental learning capabilities to select effective diagnostic features for the fault diagnosis of a reciprocating compressor (RC). The investigation involved a series of experiments conducted on a two-stage RC at baseline condition and then with faults introduced into the intercooler, drive belt and 2nd stage discharge and suction valve respectively. In addition to this, three combined faults: discharge valve leakage combined with intercooler leakage, suction valve leakage combined with intercooler leakage and discharge valve leakage combined with suction valve leakage were created and simulated to test the model. The vibration data was collected from the experimental RC and processed through pre-processing stage, features extraction, features selection before the developed diagnosis and classification model were built. A large number of potential features are calculated from the time domain, the frequency domain and the envelope spectrum. Applying Neural Networks (NNs), Support Vector Machines (SVMs), Relevance Vector Machines (RVMs) which integrate with Genetic Algorithms (GAs), and principle components analysis (PCA) which cooperates with principle components optimisation, to these features, has found that the features from envelope analysis have the most potential for differentiating various common faults in RCs. The practical results for fault detection, diagnosis and classification show that the proposed methods perform very well and accurately and can be used as effective tools for diagnosing reciprocating machinery failures.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:666442 |
| Date | January 2014 |
| Creators | Ahmed, Mahmud |
| Contributors | Ball, Andrew |
| Publisher | University of Huddersfield |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://eprints.hud.ac.uk/id/eprint/25504/ |
Page generated in 0.0062 seconds