Memory wall is one of the major performance bottlenecks in modern computer systems. SRAM caches have been used to successfully bridge the performance gap between the processor and the memory. However, SRAM cache’s latency is inversely proportional to its size. Therefore, simply increasing the size of caches could result in negative impact on performance. To solve this problem, modern processors employ multiple levels of caches, each of a different size, forming the so called memory hierarchy. Upon a miss, the processor will start to lookup the data from the highest level (L1 cache) to the lowest level (main memory). Such a design can effectively reduce the negative performance impact of simply using a large cache. However, because SRAM has lower storage density compared to other volatile storage, the size of an SRAM cache is restricted by the available on-chip area. With modern applications requiring more and more memory, researchers are continuing to look at techniques for increasing the effective cache capacity. In general, researchers are approaching this problem from two angles: maximizing the utilization of current SRAM caches or exploiting new technology to support larger capacity in cache hierarchies. The first part of this thesis focuses on how to maximize the utilization of existing SRAM cache. In our first work, we observe that not all words belonging to a cache block are accessed around the same time. In fact, a subset of words are consistently accessed sooner than others. We call this subset of words as critical words. In our study, we found these critical words can be predicted by using access footprint. Based on this observation, we propose critical-words-only cache (co cache). Unlike the conventional cache which stores all words that belongs to a block, co-cache only stores the words that we predict as critical. In this work, we convert an L2 cache to a co-cache and use L1s access footprint information to predict critical words. Our experiments show the co-cache can outperform a conventional L2 cache in the workloads whose working-set-sizes are greater than the L2 cache size. To handle the workloads whose working-set-sizes fit in the conventional L2, we propose the adaptive co-cache (acocache) which allows the co-cache to be configured back to the conventional cache. The second part of this thesis focuses on how to efficiently enable a large capacity on-chip cache. In the near future, 3D stacking technology will allow us to stack one or multiple DRAM chip(s) onto the processor. The total size of these chips is expected to be on the order of hundreds of megabytes or even few gigabytes. Recent works have proposed to use this space as an on-chip DRAM cache. However, the tags of the DRAM cache have created a classic space/time trade-off issue. On the one hand, we would like the latency of a tag access to be small as it would contribute to both hit and miss latencies. Accordingly, we would like to store these tags in a faster media such as SRAM. However, with hundreds of megabytes of die-stacked DRAM cache, the space overhead of the tags would be huge. For example, it would cost around 12 MB of SRAM space to store all the tags of a 256MB DRAM cache (if we used conventional 64B blocks). Clearly this is too large, considering that some of the current chip multiprocessors have an L3 that is smaller. Prior works have proposed to store these tags along with the data in the stacked DRAM array (tags-in-DRAM). However, this scheme increases the access latency of the DRAM cache. To optimize access latency in the DRAM cache, we propose aggressive tag cache (ATCache). Similar to a conventional cache, the ATCache caches recently accessed tags to exploit temporal locality; it exploits spatial locality by prefetching tags from nearby cache sets. In addition, we also address the high miss latency issue and cache pollution caused by excessive prefetching. To reduce this overhead, we propose a cost-effective prefetching, which is a combination of dynamic prefetching granularity tunning and hit-prefetching, to throttle the number of sets prefetched. Our proposed ATCache (which consumes 0.4% of overall tag size) can satisfy over 60% of DRAM cache tag accesses on average. The last proposed work in this thesis is a DRAM-Cache-Aware (DCA) DRAM controller. In this work, we first address the challenge of scheduling requests in the DRAM cache. While many recent DRAM works have built their techniques based on a tagsin- DRAM scheme, storing these tags in the DRAM array, however, increases the complexity of a DRAM cache request. In contrast to a conventional request to DRAM main memory, a request to the DRAM cache will now translate into multiple DRAM cache accesses (tag and data). In this work, we address challenges of how to schedule these DRAM cache accesses. We start by exploring whether or not a conventional DRAM controller will work well in this scenario. We introduce two potential designs and study their limitations. From this study, we derive a set of design principles that an ideal DRAM cache controller must satisfy. We then propose a DRAM-cache-aware (DCA) DRAM controller that is based on these design principles. Our experimental results show that DCA can outperform the baseline over 14%.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:705364 |
| Date | January 2016 |
| Creators | Huang, Cheng-Chieh |
| Contributors | Nagarajan, Vijayanand ; Topham, Nigel |
| Publisher | University of Edinburgh |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/1842/19571 |
Page generated in 0.0028 seconds