Thermoelectric generators are solid state machines used to convert temperature gradients into electrical energy. They are formed by several thermoelectric units connected electrically in series and thermally in parallel. These units are made by creating a junction between a p-type and an n-type conductor. This investigation documents the characterisation of the thermoelectric properties of carbon nanotube (CNT) films and the fabrication process of carbon nanotube-based thermoelectric devices. The Seebeck coefficient is a intrinsic property of a thermoelectric material that correlates the voltage produced by a conductor and the temperature gradient applied to it. To measure the Seebeck coefficient of films, an experimental set-up was fabricated and calibrated using constantan as standard material. CNT films of aligned nanotubes fabricated using a chemical vapour deposition method were analysed. The Seebeck coefficient along and across the samples did not show significant variations, with values between 40$\mu$V/K and 80$\mu$V/K. Using these CNT films, thermoelectric cells were fabricated with the CNT as the p-type conductor and constantan as the n-type. As a proof of concept, two hand-made thermoelectric generators were assembled by connecting hundreds of these thermoelectric cells. These devices were subjected to a temperature gradient of $\approx$200K, which was enough to produce enough power to light an LED. Other analytical techniques were used to characterise the materials used in this work. Electrical conductivity measurements, thermogravimetric analysis, Raman spectroscopy and scanning electron microscopy were performed. Using a deposition technique, films of nanotubes were produced from a liquid phase. The impact of the production method on their properties was evaluated. Characterisation equipment was developed to measure the Seebeck coefficient and thermal conductivity. Thermoelectric devices made with the carbon nanotube films were fabricated and characterised. The values of thermal conductivity of the CNT films analysed in this work are between 0.86Wm$^{-1}$K$^{-1}$. The electrical conductivity of these materials is between 3500Sm$^{-1}$ and 14100Sm$^{-1}$. The maximum figure of merit of the carbon nanotube thermoelectric devices fabricated in this work is $ZT$=0.35.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:767849 |
| Date | January 2019 |
| Creators | Miranda Reyes, Cesar Alejandro |
| Contributors | Koziol, Krzysztof |
| Publisher | University of Cambridge |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://www.repository.cam.ac.uk/handle/1810/289715 |
Page generated in 0.0026 seconds