Return to search

Red phosphorus based visible-light-driven photocatalysts for hydrogen formation from water. / CUHK electronic theses & dissertations collection

本论文主要研究了红磷作为可见光光催化剂在光解水产生氢气方面的应用。所涉及到的催化剂有:纯红磷,万寿菊状的P/YPO₄中空微米球,以及CoP₂修饰的红磷。论文也会讨论WO₃/TiO₂微米六方片及微米棒的制备,并介绍这些新材料在光解水产生氧气方面的应用。 / 第一章:发现了红磷作为可见光光催化材料在光解水制氢气领域的应用。从羟基自由基的检测和光电响应的测量表明,红磷具有在光照下产生电子和空穴的性质。同时,光生电子还原水的能力亦通过理论计算所验证。此外,半导体性质测试表明红磷具有p型半导体的性质。 / 第二章:通过红磷与YCl₃水溶液的反应,合成了万寿菊状的P/YPO₄中空微米球。所得到的微米球由结晶YPO₄纳米片和无定形红磷组成。光解水产生氢气表明,含有53 wt % YPO₄的P/YPO₄的光催化活性是红磷的6倍。同时,文中进一步讨论了中空微米球的形成机理及其光催化活性提高的原因。 / 第三章:研究并证明了CoP₂可以作为红磷光解水产生氢气的共催化剂。CoP₂的修饰可以极大的提高红磷的光解水产氢效率。其中,含2 wt % CoP₂的CoP₂/P的光解水产生氢气的速率较红磷提高了75倍。而且,CoP₂作为共催化剂的效率优于传统贵金属共催化剂Pt。关于CoP₂的共催化机理,初步认为与Co离子的配位作用有关。 / 第四章:通过简单的沉淀、煅烧反应,制备了由WO₃和 TiO₂纳米颗粒组装而成的WO₃/TiO₂微米棒和微米片。可见光氧化水产生氧气测试表明, WO₃/TiO₂复合物的光催化活性为WO₃的2.5倍以上。提出利用“颗粒堆积模型来解释WO₃/TiO₂ 微米棒和微米片的形成机理。 / 第五章:发现了WO₃对甲基蓝染料有趣的吸附性质。首先,利用钨酸铵,四丙基氢氧化铵和氯化钾合成了WO₃纳米棒。所制备的WO₃表现出了对甲基蓝很强的快速吸附能力。而且,WO₃在5s内所吸附的甲基蓝的量与活性炭在30分钟内的吸附相当。此外,通过离子间的作用力和“印迹-吸附过程对WO₃吸附甲基蓝的特性进行了解释。 / This thesis focuses primarily on the development of red phosphorus based visible-light-driven photocatalysts for hydrogen production from water. These materials include pure red phosphorus, hierarchical P/YPO₄ hollow microspheres, and CoP₂ loaded red phosphors. The fabrication of WO₃/TiO₂ microrods and plates with enhanced photocatalytic water oxidation property is also discussed. / Chapter I:Red phosphorus was discovered as a new visible-light driven photocatalyst for H₂ formation from the reduction of water by photogenerated electrons. The detection of hydroxyl radicals and results from photoconductivity measurements confirmed the photogeneration of electrons from the red phosphorus. Theoretical calculations indicated that the reduction of water by photogenerated electrons would be energetically possible. Moreover, a P-type semiconductor behavior of red phosphorus was observed. / Chapter II:Hierarchical P/YPO₄ hollow microspheres with enhanced photocatalytic activity than the individual components for hydrogen formation were prepared. The composite was synthesized by the reaction from amorphous red P and YCl₃ aqueous solution via a hydrothermal method. The final product consisted of crystalline YPO₄ nanosheets and amorphous red phosphorus. The composite with 53 wt % YPO₄ was up to 6 times more active than red phosphorus under visible light irradiation. The formation mechanism of hierarchical microspheres and the enhanced photocatalytic activity were discussed. / Chapter III:CoP₂ loaded as a cocatalyst significantly enhanced the rate of H2₂ formation from water over red phosphorus under visible light irradiation. The rate of H₂ formation over red P was increased by up to 75 times when loaded with 2 wt % CoP₂. The performance of CoP₂ as a cocatalyst was even higher than that of Pt. The coordination effect of Co ions was proposed to explain the enhanced photocatalytic activity by CoP₂ loaded. / Appendix I:WO₃/TiO₂ microrods and microplates assembled from WO₃ and TiO₂ nanoparticles were prepared by simple precipitation and calcination processes. Their photocatalytic properties for O₂ formation from water were investigated. The composites were c.a. 2.5 times more active than WO₃ in photocatalytic O₂ formation under visible light irradiation. The formation mechanism of WO₃/TiO₂ microstructures was explained from “particle packing mode“. / Appendix II:An interestingly adsorption property of hexagonal tungsten trioxide to MB was discovered. The WO₃ were prepared from ammonium metatungstate, tetrapropyl ammonium hydroxide and potassium chloride. The product exhibited a high adsorption capacity toward methylene blue (MB), and the time required for reaching adsorption equilibrium was less than 5 seconds. The amount of MB adsorbed by WO₃ in 5 s was equivalent to that adsorbed by activated carbon for 30 min. Ionic interaction and “imprinting-adsorption“ were proposed to explain the adsorption property of as-prepared WO₃ sample. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Wang, Feng. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2012. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese. / Abstract (Chinese) --- p.i / Abstract --- p.iii / Acknowledgement --- p.vi / List of Figures --- p.viii / List of Tables --- p.xviii / Chapter Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Basic Principles of Photocatalytic Water Splitting --- p.1 / Chapter 1.2 --- Strategies to Develop Visible-light-driven Photocatalysts --- p.3 / Chapter 1.2.1 --- Native visible-light-driven photocatalysts --- p.3 / Chapter 1.2.2 --- Doping --- p.6 / Chapter 1.2.2.1 --- Metal or non-metal ions doping --- p.6 / Chapter 1.2.2.2 --- Co-doping --- p.10 / Chapter 1.2.2.3 --- Homogeneous doping --- p.12 / Chapter 1.2.3 --- Solid solution photocatalysts --- p.15 / Chapter 1.2.4 --- Dye sensitized photocatalysts --- p.17 / Chapter 1.3 --- Strategies to Enhance Photocatalytic Efficiency --- p.19 / Chapter 1.3.1 --- Semicondutor combination --- p.19 / Chapter 1.3.1.1 --- Inorganic sensitization --- p.20 / Chapter 1.3.1.2 --- Bidirectional charge-carrier transfer --- p.21 / Chapter 1.3.1.3 --- Indirect Z-scheme --- p.22 / Chapter 1.1.1.4 --- Direct Z-scheme --- p.23 / Chapter 1.3.2 --- Cocatalyst loading --- p.24 / Chapter 1.3.2.1 --- Noble metal cocatalysts --- p.24 / Chapter 1.3.2.2 --- Metal oxide cocatalysts --- p.25 / Chapter 1.3.2.3 --- Metal sulfide cocatalysts --- p.26 / Chapter 1.3.2.4 --- Mixed cocatalysts --- p.27 / Chapter 1.3.3 --- Hydrogen Generation Systems Containing Sacrificial Reagents --- p.32 / Chapter 1.4 --- Summary --- p.34 / Chapter 1.5 --- Aim of This Thesis and Its Significance --- p.35 / Chapter 1.6 --- References --- p.36 / Chapter Chapter Two --- Red Phosphorus: An Elemental Photocatalyst for Hydrogen Formation from Water under Visible Light Irradiation --- p.52 / Chapter 2.1 --- Introduction --- p.52 / Chapter 2.2 --- Experimental --- p.54 / Chapter 2.2.1 --- Synthesis --- p.54 / Chapter 2.2.1.1 --- Preparation of crystalline red phosphorus --- p.54 / Chapter 2.2.1.1 --- Preparation of red phosphorus films --- p.54 / Chapter 2.2.2 --- Characterization --- p.55 / Chapter 2.2.3 --- Gas evolution tests --- p.56 / Chapter 2.2.4 --- Detection of photogenerated OH radicals --- p.56 / Chapter 2.2.5 --- Computational details --- p.57 / Chapter 2.2.6 --- Photoconductivity measurements and electrical tests --- p.57 / Chapter 2.3 --- Results and Discussion --- p.59 / Chapter 2.4 --- Conclusions --- p.74 / Chapter 2.5 --- References --- p.75 / Chapter Chapter Three --- Hierarchical P/YPO4 Microsphere for Photocatalytic Hydrogen Production from Water under Visible Light Irradiation --- p.79 / Chapter 3.1 --- Introduction --- p.79 / Chapter 3.2 --- Experimental --- p.81 / Chapter 3.2.1 --- Synthesis --- p.81 / Chapter 3.2.2 --- Characterization --- p.81 / Chapter 3.2.3 --- Gas evolution tests --- p.82 / Chapter 3.3 --- Results and Discussion --- p.83 / Chapter 3.4 --- Conclusions --- p.95 / Chapter 3.5 --- References --- p.95 / Chapter Chapter Four --- Enhancement of Photocatalytic H₂ Formation from Water over Red P by Loading CoP₂ as Cocatalyst --- p.99 / Chapter 4.1 --- Introduction --- p.99 / Chapter 4.2 --- Experimental --- p.100 / Chapter 4.2.1 --- Synthesis --- p.100 / Chapter 4.2.2 --- Characterization --- p.101 / Chapter 4.2.3 --- Hydrogen formation tests --- p.101 / Chapter 4.3 --- Results and Discussion --- p.103 / Chapter 4.4 --- Conclusions --- p.109 / Chapter 4.5 --- References --- p.109 / Chapter Chapter Five --- Conclusions and Future Work --- p.112 / Chapter 5.1 --- Conclusions --- p.112 / Chapter 5.2 --- Recommendations for future work --- p.112 / Chapter Appendix I --- WO₃/TiO₂ Microstructures for Photocatalytic Water Oxidation under Visible Light Irradiation --- p.114 / Chapter AI.1 --- Introduction --- p.114 / Chapter AI.2 --- Experimental --- p.116 / Chapter AI.2.1 --- Sample preparation --- p.116 / Chapter AI.2.1.1 --- Precursor synthesis --- p.116 / Chapter AI.2.1.2 --- Synthesis of assembled WO₃/TiO₂ microstructures --- p.118 / Chapter AI.2.2 --- Characterization --- p.119 / Chapter AI.2.3 --- Oxygen formation tests --- p.120 / Chapter AI.3 --- Results and Discussion --- p.121 / Chapter AI.4 --- Conclusions --- p.137 / Chapter AI.5 --- References --- p.137 / Chapter Appendix II --- Hexagonal Tungsten Trioxide Nanorods as a Rapid Adsorbent for Methylene Blue --- p.142 / Chapter AII.1 --- Introduction --- p.142 / Chapter AII.2 --- Experimental --- p.143 / Chapter AII.2.1 --- Sample preparation --- p.143 / Chapter AII.2.2 --- Characterization --- p.144 / Chapter AII.3 --- Results and Discussion --- p.145 / Chapter AII.4 --- Conclusions --- p.159 / Chapter AII.5 --- References --- p.159 / List of Publications --- p.163

Identiferoai:union.ndltd.org:cuhk.edu.hk/oai:cuhk-dr:cuhk_328185
Date January 2012
ContributorsWang, Feng, Chinese University of Hong Kong Graduate School. Division of Life Sciences.
Source SetsThe Chinese University of Hong Kong
LanguageEnglish, Chinese
Detected LanguageEnglish
TypeText, bibliography
Formatelectronic resource, electronic resource, remote, 1 online resource (xxii, 165 leaves) : ill. (some col.)
RightsUse of this resource is governed by the terms and conditions of the Creative Commons “Attribution-NonCommercial-NoDerivatives 4.0 International” License (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Page generated in 0.0025 seconds