本论文介绍了一种基于扫描共聚焦显微镜和微流反应器用于研究化学振动子同步的系统。这个系统利用300微米的PNIPAm胶体颗粒作为振动子，Ru(vmbpy)(bpy)₂(PF₆)₂ 被参杂到振动子里充当BelousovZhabotinsky（BZ）振荡反应的催化剂。扫描共聚焦显微镜具有很高的灵敏度，可以给出高质量的图片以供研究分析。通过实验证明低于56W/cm²强度的扫描激光对BZ反应没有影响。这里所运用的微流反应器包括两个部分，PMMA材质的微池和PDMS材质的流道。此反应器可通过流道不停地补充BZ反应的反应物从而保证振荡的一致性。 / 通通过此系统，我们可以研究不同的两个振动子的同步问题。在实验中，振动子间的同步是由两者间的距离决定的。振动子在靠近时同步在分开至临界距离以外处不同步。另外，我利用COMSOL来模拟实验中的现象，发现模拟的结果和实验中的现象十分吻合。 / In this thesis, I present an experimental platform based on laser scanning confocal microscopy (LSCM) and continuous flow microreactor (CFMR) to study coupled chemical oscillators. PNIPAm gel particles around 300 micron were synthesized in the microfluidic device as the oscillators. Ru(vmbpy)(bpy)₂(PF₆)₂ was used as the catalyst of the BelousovZhabotinsky (BZ) reaction. The LSCM offers a good signal-to-noise ratio and better imaging quality. We demonstrated that the scanning laser with the power below 56W/cm² had no influence to BZ reaction. The CFMR, consisting of the PMMA microwell and the PDMS microchannel, can maintain the oscillation of the oscillators with a continuous supply of the BZ mixture. / The synchronization of the double heterogeneous oscillators was studied by the platform. The coupling intensity was controlled by changing the distance between the two oscillators. Results showed that the synchronization occurred as the oscillators were close and was lost as the oscillators were separated beyond a critical distance. The results of the numerical simulation by COMSOL agreed well with the experimental observation. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Guo, Dameng. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2012. / Includes bibliographical references (leaves 40-41). / Abstracts also in Chinese. / Abstract --- p.i / 摘要 --- p.ii / Acknowledgement --- p.iii / Table of contents --- p.iv / Chapter Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Synchronization of chemical oscillating systems --- p.1 / Chapter 1.2 --- The Belousov-Zhabotinsky reaction --- p.4 / Chapter 1.2.1 --- FKN model --- p.5 / Chapter 1.2.2 --- Effect of light illumination on ruthenium catalyzed BZ reaction --- p.7 / Chapter 1.2.3 --- Luminescence of ruthenium catalyzed in the BZ reaction --- p.8 / Chapter 1.3 --- Oscillators based on the BZ reaction --- p.9 / Chapter 1.4 --- Detection methods for the BZ oscillating systems --- p.10 / Chapter 1.4.1 --- Ion selective electrode and optical microscopy --- p.10 / Chapter 1.4.2 --- Objective of the research --- p.10 / Chapter Chapter 2 --- LSCM and continuous flow microreactor based platform --- p.12 / Chapter 2.1 --- Introduction --- p.12 / Chapter 2.2 --- Experimental --- p.13 / Chapter 2.2.1 --- The fabrication of the oscillators --- p.13 / Chapter 2.2.2 --- The fabrication of the CFMR --- p.14 / Chapter 2.2.3 --- The detection method --- p.16 / Chapter 2.3 --- Results and discussions --- p.16 / Chapter 2.3.1 --- The comparison of PMMA and PDMS microreactors --- p.16 / Chapter 2.3.2 --- The flow rate of the BZ mixture to maintain the oscillation --- p.18 / Chapter 2.3.3 --- The size of the microreactor --- p.19 / Chapter 2.3.4 --- The factors to reduce the influence of the laser on the oscillators --- p.21 / Chapter 2.4 --- Conclusions --- p.23 / Chapter Chapter 3 --- The studying of the synchronization of the double oscillators --- p.24 / Chapter 3.1 --- Introduction --- p.24 / Chapter 3.1.1 --- Kuramoto model for illustrating the synchronization of double oscillators --- p.24 / Chapter 3.1.2 --- Transition from disorder to synchronization --- p.25 / Chapter 3.2 --- Experimental and simulation --- p.26 / Chapter 3.2.1 --- The dispensing and detection of the oscillators in the microreactor --- p.26 / Chapter 3.2.2 --- The simulation model --- p.27 / Chapter 3.3 --- Results and discussion --- p.28 / Chapter 3.3.1 --- The controlling of the coupling intensity --- p.28 / Chapter 3.3.2 --- The results of the synchronization --- p.30 / Chapter 3.3.2.1 --- Synchronization --- p.30 / Chapter 3.2.2.2 --- The critical distance for the synchronization and the transition --- p.31 / Chapter 3.3.3 --- The results of the simulation --- p.34 / Chapter 3.4 --- Conclusion --- p.35 / Chapter Chapter 4 --- Conclusion --- p.37 / Chapter 4.1 --- Summary --- p.37 / Chapter 4.2 --- Discussions and future perspectives --- p.38 / Reference --- p.40 / Appendix --- p.42 / Chapter 1. --- Code in Matlab for calculating the RGB value of ROI in the images from the LSCM --- p.42 / Chapter 2. --- The power of the laser --- p.43 / Chapter 2.1 --- The power of the laser in the LSCM --- p.43 / Chapter 2.2 --- The irradiation power on the oscillators --- p.44 / Chapter 3. --- The energy transferred to the oscillator --- p.44 / Chapter 4. --- The model in COMSOL --- p.45
| Identifer | oai:union.ndltd.org:cuhk.edu.hk/oai:cuhk-dr:cuhk_328529 |
| Date | January 2012 |
| Contributors | Guo, Dameng., Chinese University of Hong Kong Graduate School. Division of Chemistry. |
| Source Sets | The Chinese University of Hong Kong |
| Language | English, Chinese |
| Detected Language | English |
| Type | Text, bibliography |
| Format | electronic resource, electronic resource, remote, 1 online resource (vi, 45 leaves) : ill. (some col.) |
| Rights | Use of this resource is governed by the terms and conditions of the Creative Commons “Attribution-NonCommercial-NoDerivatives 4.0 International” License (http://creativecommons.org/licenses/by-nc-nd/4.0/) |
Page generated in 0.0024 seconds