Triboluminescent-based sensor systems have the potential to enable in-situ and distributed structural health monitoring of composite structures. Inability to effectively capture and transmit optical signals generated within opaque composites like concrete and carbon fiber reinforced polymers have however greatly limited their use. This problem has been solved by developing the bio-inspired in-situ triboluminescent optical fiber (ITOF) sensor. This sensor has the potential for wireless, in-situ, real-time and distributed (WIRD) damage monitoring. Its integrated sensing (triboluminescent thin film) and transmission (polymer optical fiber) components convert the energy from damage events like impacts and crack propagation into optical signals that are indicative of the magnitude of damage in composites. Utilizing the triboluminescent (TL) property of ZnS-Mn, the ITOF sensor has been successfully fabricated. Key design parameters were evaluated to develop a sensor with enhanced damage sensing capability. Sensor's performance was then characterized with Raman spectroscopy, field emission scanning electron microscopy (FESEM) and dynamic mechanical analysis (DMA). Flexural tests were also carried out to evaluate the damage sensing performance of the sensor before integrating into unreinforced concrete beams to create triboluminescent multifunctional cementitious composites (TMCC) with in-situ damage monitoring capabilities like biological systems. Results show that the ZnS-Mn in the epoxy coating of the ITOF sensor does not degrade the thermo-mechanical properties of the composite system. Raman spectroscopy indicates that the ZnS-Mn crystals retained their physical and chemical properties after undergoing the sensor fabrication process. Enhanced side-coupling of TL signals from the ITOF coating into the polymer optical fiber (POF) was achieved with TL thin film coating on POF. This makes distributed sensing possible when the length of the POF is coated with TL thin film. A new approach to damage characterization using TL emission profiles was employed with the TMCC. Three modes of sensor excitation in the TMCC were identified indicative of sensor's ability to sense crack propagation through the beam even when not in contact with the crack. FESEM analysis indicated that fracto-triboluminescence was responsible for the TL signals observed at beam failure. The TL profile analysis promises to facilitate better understanding of crack propagation in composite structural materials. / A Dissertation submitted to the Department of Industrial and Manufacturing Engineering in partial fulfillment of
the requirements for the degree of Doctor of Philosophy. / Spring Semester, 2013. / November 28, 2012. / bridges, composites, concrete, sensor, SHM, triboluminescence / Includes bibliographical references. / Okenwa I. Okoli, Professor Directing Dissertation; John O. Sobanjo, University Representative; Tao Liu, Committee Member; Zhiyong Liang, Committee Member.
| Identifer | oai:union.ndltd.org:fsu.edu/oai:fsu.digital.flvc.org:fsu_253351 |
| Contributors | Olawale, David Oluseun (authoraut), Okoli, Okenwa I. (professor directing dissertation), Sobanjo, John O. (university representative), Liu, Tao (committee member), Liang, Zhiyong (committee member), Department of Industrial and Manufacturing Engineering (degree granting department), Florida State University (degree granting institution) |
| Publisher | Florida State University, Florida State University |
| Source Sets | Florida State University |
| Language | English, English |
| Detected Language | English |
| Type | Text, text |
| Format | 1 online resource, computer, application/pdf |
| Rights | This Item is protected by copyright and/or related rights. You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s). The copyright in theses and dissertations completed at Florida State University is held by the students who author them. |
Page generated in 0.0022 seconds