<p>The purpose of this thesis is to explore the angular response to dose of the MatriXX Evolution, manufactured by IBA Dosimetry, a 2-dimensional ion chamber array used for patient specific quality assurance of advanced radiotherapy techniques such as IMRT and VMAT. Investigations were made to characterize the angular response of the MatriXX and describe any differences from the Philips Pinnacle<sup>3</sup> Treatment Planning System (TPS) used at the Juravinski Cancer Centre.</p> <p>A comparison was made between the gantry angle dependent correction factors supplied by the manufacturer and those derived by measurement. Gantry angle dependent correction factors were derived, with the MatriXX under 5cm polystyrene build-up and without any build-up, for the 5 x 5 cm<sup>2</sup>, 10 x 10 cm<sup>2</sup> and 20 x 20 cm<sup>2</sup> field sizes.</p> <p>For gantry angles ranging from 320<sup>o</sup> to 40<sup>o</sup> the maximum difference between the derived gantry angle dependent correction factors and those provided by the manufacturer is 1.5%, at a gantry angle of 320<sup>o</sup>, a 5 x 5 cm<sup>2</sup> field and without build-up. The differences for the 10 x 10 cm<sup>2</sup> and 20 x 20 cm<sup>2</sup> fields within this gantry angle range are less than 1%. Between gantry angles of 50<sup>o</sup> and 130<sup>o</sup> the largest difference is 4.9% at 100<sup>o</sup>, for the 5 x 5 cm<sup>2</sup>field without build-up. The other field sizes show similar differences; 4.7% at gantry angle of 120<sup>o</sup> for 10 x 10 cm<sup>2</sup> with build-up and 4.0% at a gantry angle of 80<sup>o</sup> without build-up. Between gantry angles of 140<sup>o</sup> to 220<sup>o</sup> the greatest discrepancy is for the 5 x 5 cm<sup>2</sup> field with build-up, a difference of 3.0%. The 10 x 10 cm<sup>2</sup> has a maximum difference of 2.4% at gantry angles of 180<sup>o</sup> and 200<sup>o</sup>, both when the MatriXX has build-up. The maximum discrepancy for gantry angle dependent correction factors for the 20 x 20 cm<sup>2</sup> fields is at a gantry angle of 140<sup>o</sup>, when the MatriXX has build-up. Between the gantry angles of 230<sup>o</sup> to 310<sup>o</sup> the largest discrepancy occurs between the derived gantry angle dependent correction factors and those supplied by the manufacturer. For the 5 x 5 cm<sup>2</sup>, 10 x 10 cm<sup>2</sup> and 20 x 20 cm<sup>2</sup> fields respectively the largest differences are 5.9%, 4.5% and 4.9%. All three occur when there is no build-up.</p> / Master of Science (MSc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/12602 |
| Date | 10 1900 |
| Creators | Sopher, Daniel A. |
| Contributors | Ostapiak, Orest, Diamond, Kevin, Farrell, Tom, Medical Physics |
| Source Sets | McMaster University |
| Detected Language | English |
| Type | thesis |
Page generated in 0.0022 seconds