Return to search

Methods for 3D Structured Light Sensor Calibration and GPU Accelerated Colormap

In manufacturing, metrological inspection is a time-consuming process.
The higher the required precision in inspection, the longer the
inspection time. This is due to both slow devices that collect
measurement data and slow computational methods that process the data.
The goal of this work is to propose methods to speed up some of these
processes. Conventional measurement devices like Coordinate Measuring
Machines (CMMs) have high precision but low measurement speed while
new digitizer technologies have high speed but low precision. Using
these devices in synergy gives a significant improvement in the
measurement speed without loss of precision. The method of synergistic
integration of an advanced digitizer with a CMM is discussed.
Computational aspects of the inspection process are addressed next. Once
a part is measured, measurement data is compared against its
model to check for tolerances. This comparison is a time-consuming
process on conventional CPUs. We developed and benchmarked some GPU accelerations. Finally, naive data fitting methods can produce misleading results in cases with non-uniform data. Weighted total least-squares methods can compensate for non-uniformity. We show how they can be accelerated with GPUs, using plane fitting as an example. / Thesis / Doctor of Philosophy (PhD)

Identiferoai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/23449
Date January 2018
CreatorsKurella, Venu
ContributorsSpence, Allan, Anand, Christopher, Computational Engineering and Science
Source SetsMcMaster University
Languageen_US
Detected LanguageEnglish
TypeThesis

Page generated in 0.0023 seconds