In this dissertation, the aim was to develop a platinum specific resin to be utilized for the early removal of platinum from the industrial feed solution. Efforts were therefore directed towards the syntheses of silica based resins, with active centra, designed for platinum. The large chlorometallate ions present in the feed stream, were characterized in terms of physical parameters relevant to phase distribution, namely distortability (RD), charge density, softness (σ) etc. Matching cations for each of the types were investigated. In order to attempt the design of platinum specific resins, different structural amines were used to aminate the silicone precursor and to subsequently fix these onto the silica framework. Two different solvents namely alcohol and dmf were used in this process, resulting in two sets of resins, with different properties. The design was based on previous experience with these ions, with reference to their behaviour towards different types of cations. The platinum species, PtCl6 2- and PtCl4 2-, as well as the most important contaminants in the feed stream, were typified, bearing in mind size, charge, charge density and distortability. Different types of cationic centra, having differences in charge density, stereochemical crowding and extent of hydrophobicity, were synthesized and tested-both as solvent extractants (where possible) and silica based resins. The results indicated that, partly screened secondary ammonium cationic resin species, which could be regarded as “intermediate”, proved to be satisfactory both in their high percentage extraction for PtCl4 2- and rejection of contaminants like chlororhodates, chloroiridates(III) and FeCl4 -. It was however necessary, to work at a redox potential, where iridium(IV) in the form of IrCl6 2-, was absent. Various 2-aminoalkane resins were prepared, with variation in the length of alkane group and synthesised by the two different solvents. The latter resulted in two sets of resins with not only differing compactness, but also having significantly different properties with reference to platinum specificity, HCl effect and stripping potential. The 2-aminobutane and 2-aminoheptane resins in particular, proved to be very satisfactory platinum specific resins, both with respect to selectivity, platinum capacity and stripping potential. The various physical parameters could be applied to identify the chemical behaviour of anions and assist in the development of anion specificity for the relevant species.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:10401 |
| Date | January 2008 |
| Creators | Jonck, Heine |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Science |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MSc |
| Format | xxiii, 192 leaves : ill. (some col.), pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.002 seconds