Robotic simulators for use in Evolutionary Robotics (ER) have certain challenges associated with the complexity of their construction and the accuracy of predictions made by these simulators. Such robotic simulators are often based on physics models, which have been shown to produce accurate results. However, the construction of physics-based simulators can be complex and time-consuming. Alternative simulation schemes construct robotic simulators from empirically-collected data. Such empirical simulators, however, also have associated challenges, such as that some of these simulators do not generalize well on the data from which they are constructed, as these models employ simple interpolation on said data. As a result of the identified challenges in existing robotic simulators for use in ER, this project investigates the potential use of Artificial Neural Networks, henceforth simply referred to as Neural Networks (NNs), as alternative robotic simulators. In contrast to physics models, NN-based simulators can be constructed without needing an explicit mathematical model of the system being modeled, which can simplify simulator development. Furthermore, the generalization capabilities of NNs suggest that NNs could generalize well on data from which these simulators are constructed. These generalization abilities of NNs, along with NNs’ noise tolerance, suggest that NNs could be well-suited to application in robotics simulation. Investigating whether NNs can be effectively used as robotic simulators in ER is thus the endeavour of this work. Since not much research has been done in employing NNs as robotic simulators, many aspects of the experimental framework on which this dissertation reports needed to be carefully decided upon. Two robot morphologies were selected on which the NN simulators created in this work were based, namely a differentially steered robot and an inverted pendulum robot. Motion tracking and robotic sensor logging were used to acquire data from which the NN simulators were constructed. Furthermore, custom code was written for almost all aspects of the study, namely data acquisition for NN training, the actual NN training process, the evolution of robotic controllers using the created NN simulators, as well as the onboard robotic implementations of evolved controllers. Experimental tests performed in order to determine ideal topologies for each of the NN simulators developed in this study indicated that different NN topologies can lead to large differences in training accuracy. After performing these tests, the training accuracy of the created simulators was analyzed. This analysis showed that the NN simulators generally trained well and could generalize well on data not presented during simulator construction. In order to validate the feasibility of the created NN simulators in the ER process, these simulators were subsequently used to evolve controllers in simulation, similar to controllers developed in related studies. Encouraging results were obtained, with the newly-evolved controllers allowing real-world experimental robots to exhibit obstacle avoidance and light-approaching behaviour with a reasonable degree of success. The created NN simulators furthermore allowed for the successful evolution of a complex inverted pendulum stabilization controller in simulation. It was thus clearly established that NN-based robotic simulators can be successfully employed as alternative simulation schemes in the ER process.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:10462 |
| Date | January 2010 |
| Creators | Pretorius, Christiaan Johannes |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Science |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MSc |
| Format | ix, 184 leaves : ill. (some col.) ; 30 cm, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0023 seconds