This study was intended to establish which polymer material is best suited as the material for bushes used in high force small oscillating angular contact applications as typically found in a large sugar mill coupling. A Tribometer as well as a designed and manufactured Bearing Testing Machine, which simulates and accelerates the wear caused in the intended application, was used to determine the wear rates and coefficients of friction for seven polymer materials. Materials were selected for their superior mechanical and thermal properties. The Tribometer was fitted with a linear reciprocating rig, so as to simulate the small oscillating movement prevalent in the intended application. Each Tribometer test ran for a duration of two hours with a frequency of 33.1 Herts and a normal loading of 40N. Bearing Testing Machine tests were done under similar constraints but with 30kN loading present on the surface of a bushes inner race. These tests had a longer duration of 24 or 48 hours or until intense wearing occurred. Initially both testing methods will be analysed independently of each other in order to try and identify a relationship between the wear rate and coefficient of friction for the different polymers. The different testing methods’ results will be compared to each other in order to establish if a correlation between the materials tested could be found.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:9637 |
| Creators | Bradfield, Jarad Wade |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Engineering, the Built Environment and Information Technology |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MTech (Mechanical Engineering) |
| Format | xxi, 151 leaves, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0016 seconds