This dissertation covers the design and manufacture of an autonomous guided cart (AGC) for use in the material handling industry. General Motors South Africa (GMSA) requires a low-cost AGC for use in their Struandale plant. A budget of R35 000 per unit was proposed. The researcher, in collaboration with staff at GM, compiled a list of engineering requirements for the AGC. After research into the unique problems of the project, an examination of a previous design attempt by staff of GM Thailand, the researcher developed a new design, the subject of this report. Different solutions for each design problem were investigated before the design was finalised. A three-wheeled vehicle was designed making use of two motors in a differential-drive setup to control motion. Navigation is via a line-following mechanism, using an induction sensor-array in conjunction with a pre-laid metallic strip. To aid the design, the system was modelled to understand the different control elements at play. The researcher developed software for several aspects of the design: for the PLC controlling the system and motors; for a microcontroller that communicates with the PLC and a wireless module; for a computer server that communicates with a second wireless device, receiving information from the PLC; and a web interface to view this information. These form the SCADA integration of the project. The final product meets the GMSA specifications. It is a robot capable of towing a trolley of mass not exceeding 350 kg. While the robot is able to navigate a pre-laid route, it cannot reliably stop at marked locations. It is possible to monitor the system via a web-interface. The robot is capable of operating for an entire 8-hour shift before the batteries need to be recharged. The total cost of the prototype was R26 340.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:9655 |
| Date | January 2015 |
| Creators | Cawood, Gareth James |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Engineering, the Built Environment and Information Technology |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MEngineering |
| Format | xiii, 156 leaves, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.002 seconds