Excess thermodynamic properties have been determined for several binary liquid mixtures with the aim of testing various thermodynamic theories and postulates. Excess molar enthalpies, HEm, have been determined using an LKB flow microcalorimeter and excess molar volumes, VEm, have been determined using an Anton Paar vibrating tube densitometer. The activity coefficients at infinite dilution ƴ∞₁₃, have been determined using an atmospheric pressure gas-liquid chromatograph. The excess molar enthalpies and the excess molar volumes have been measured at 298.15 K for systems involving the bicyclic compounds decahydronaphthalene (decalin), 1,2,3,4-tetrahydronaphthalene (tetralin), bicyclohexyl, or cyclohexylbenzene mixed with 1- hexene, 1-hexyne, 1-heptene, 1-heptyne, cyclohexene, 1,3-cyclohexadiene, 1,4- cyclohexadiene, or benzene. These excess properties have also been measured for systems where the bicyclic compound has been replaced with benzene, cyclohexane or n-hexane. The results show defmite trends related to the size, shape, and the degree of unsaturation of the component molecules. The Flory theory has been used to predict excess molar enthalpies and excess molar volumes for {(a bicyclic compound or benzene or cyclohexane or n-hexane) +(an n-alkane or a 1-alkene or a 1-alkyne or a cycloalkane or cyclohexene or a cycloalkadiene or benzene)}. The one parameter equations offer reasonably good correlations between the predicted and the experimental results. More insight into the origins of the contnbutions to the excess thermodynamic properties for these systems has been gained by considering the approximate equations of Patterson and co-workers, which separate the interactional and the free volume contributions to the excess molar enthalpy and the excess molar volume. The one parameter equations have adequately rationalized a good deal of the observed behaviour for HEm and VEm. The theory of Liebermann and co-workers, which does not employ any adjustable parameters, has not been as successful at predicting the excess thermodynamic properties for the above systems. The activity coefficients at infinite dilution have been measured at 278.15 K, 288.15 K and 298.15 K for n-bexane, 1-bexene, 1-hexyne, n-heptane, 1-heptene, 1-heptyne, cyclohexane, cyclohexene, 1,3-cyclohexadiene, 1,4-cyclohexadiene, and benzene, in decalin, tetralin, bicyclohexyl, and cyclohexylbenzene. Solvent losses from the column have been accounted for by an extrapolation procedure. The activity coefficient results together with the HEm and VEm values have been used to calculate the partial molar excess thermodynamic properties of mixing at infinite dilution. The partial molar excess properties at infinite dilution for decalin mixtures are similar to those for bicyclohexyl mixtures. There is also a similarity between the properties of the tetralin mixtures and the cyclohexylbenzene mixtures. The cycloalkadienes, benzene and the 1-alkynes exhibit a strong dissociation effect on being mixed with the saturated solvents, decalin and bicyclohexyl, but associate strongly with tetralin and with cyclohexylbenzene. The Flory theory bas been used to predict activity coefficients at infinite dilution from the experimentally determined HEm results for { (n-bexane or 1-hexene or 1-hexyne or naheptane or 1-heptene or 1-beptyne) + (a bicyclic compound)}. The theory is much better at predicting values for mixtures where both components are either saturated molecules or are unsaturated molecules than for {saturated + unsaturated} mixtures.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:rhodes/vital:4531 |
| Date | January 1989 |
| Creators | Baxter, Rodney Charles |
| Publisher | Rhodes University, Faculty of Science, Chemistry |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Doctoral, PhD |
| Format | 419 leaves, pdf |
| Rights | Baxter, Rodney Charles |
Page generated in 0.0112 seconds