Thesis (MFor)--Stellenbosch University, 2011. / ENGLISH ABSTRACT: This study is aimed at testing the possibility of using woody biomass from three invasive
woody vegetation types (Spider Gum, Myrtle and Acacia) for production of bioenergy in the
Cape Agulhas Plain. Physical recoverability of the woody biomass was studied by means of
a semi-mechanized harvesting system to evaluate potential productivity, operational costs
and the estimated yield energy gain.
The system consisted of five components: manual harvesting, motor-manual harvesting,
extraction, chipping and road transport. Data on the system productivity was obtained using
activity sampling and time study techniques. Activity sampling was applied on manual and
motor-manual harvesting in order to record harvesting time and standard time study
techniques were used to obtain time data for extraction, chipping and road transport
operations.
Findings revealed benefits associated with the utilisation of invasive woody vegetation as
energy feedstock. Therefore, the problem of exotic tree species can be dealt with by
transforming them into energy feedstock, thus minimising the effect of invasive plants. At
the same time essential biomass energy can be produced, while some of the cost of
production could be offset by the benefits accruing from the biomass energy.
The Acacia site, characterized by larger mature dense trees, had the highest amount of
harvested biomass compared to the rest of the vegetation types (i.e. Myrtle and Spider
Gum).
The overall system productivity was found to be significantly influenced by a low equipment
utilisation rate, estimated at 50%. This resulted in low production rates in general. The low
supply rate of material to the chipper by the three-wheeled loader (1.5 – 5.3 oven-dry tonne
per production machine hour) was found to be a major constraint in the chipping process,
especially when considering that the chipper is potentially capable of chipping 4 – 9.4 ODT
PMH-1 at the harvesting sites. This resulted in a significant energy balance of 463 GJ
between output and input energy of the system. The overall total supply chain system costs
based various road transport distances of species ranged from R 322.77 ODT-1 to R 689.76
ODT-1 with an average of R 509 ODT-1. This was found to be costly compare to the case where high machine utilisation rate and optimal productivity are used (average of R 410
ODT-1), biomass recoverability in this field trial had a higher total system cost due to low
productivity, resulting from the low equipment utilisation rate applied. / AFRIKAANSE OPSOMMING: Hierdie studie was gemik daarop om die moontlikheid van die gebruik van houtagtige
biomassa, afkomstig van uitheemse plantegroei (Bloekom, Mirte en Akasias) op die
Agulhasvlakte vir bio-energie te ondersoek. Potensiële produktiwiteit, bedryfskostes en die
geskatte energie opbrengs toename is gebruik, om die fisiese opbrengs van houtagtige
biomassa van ʼn semi-gemeganiseerde ontginningstelsel te evalueer.
Die stelsel het uit vyf komponente bestaan: Handontginning, motor-handontginning,
uitsleep, verspandering en padvervoer. Data oor die stelselproduktiwiteit is uit tydstudie en
aktiwiteit steekproewe verkry. Aktiwiteit steekproewe is toegepas op hand- en motorhandontgining
om ontginingstyd te verkry, terwyl tydstudie standaardtegnieke gebruik is om
tyd data vir uitsleep, verspandering en padvervoer werksaamhede te verkry.
Bevindings het die voordele met bettrekking tot die gebruik van uitheemse plantegroei as
energiebron bevestig. Die uitdaging rondom die verspreiding van uitheemse plantegroei
kan dus aangespreek word deur dit as energiebron te benut. Die produksiekoste vir die
toegang tot die bruikbare biomassa kan moontlik voorsien word uit die voordele van die
gebruik van die energie wat uit die benutting van die biomassa verkry word.
Die groter meer volwasse en digte Akasia opstand het die meeste ontginde biomassa
gelewer vergeleke met die ander opstande in die studie (d.i. Mirte en Bloekom).
Die stelselproduktiwiteit is beduidend beïnvloed deur die lae toerustinggebruik wat minder
as 50% beloop het. Dit het ook laer produksievermoë in die algemeen tot gevolg gehad. In
die verspandering werksaamheid blyk die lae invoer tempo (1.5 – 5.3 oonddroog ton per
produktiewe masjienuur) van die driewiellaaier die beperking op die proses te wees, veral
as in ag geneem word dat die verspandering teen 4-9.4 ODT PMH-1 kan geskied. Die
resultaat was ʼn beduidende energie balans van 463 GJ tussen uitset- en invoerenergie van
die stelsel. Die totale toevoerketting kostes gegrond op verskeie padvervoer afstande van
die spesies was tussen R 322.77 ODT-1 tot R 689.76 ODT-1, met ʼn gemiddelde rondom R
509 ODT-1. Die resultaat is duur gevind in vergeleke met gevalle waar hoë masjiengebruik
en optimale produktiwiteit (gemiddeld van R 410 ODT-1), moontlik was. Die biomassaherwinning in die studie het ʼn hoër totale stelselkoste gehad veroorsaak deur lae
produktiwiteit, wat verwant is aan die laer toerusting gebruikstempo wat verkry is.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/17873 |
| Date | 12 1900 |
| Creators | Kitenge, Emile Museu |
| Contributors | Ackerman, P. A., Seifert, Thomas, Stellenbosch University. Faculty of Agrisciences. Dept. of Forest and Wood Science. |
| Publisher | Stellenbosch : Stellenbosch University |
| Source Sets | South African National ETD Portal |
| Language | en_ZA |
| Detected Language | English |
| Type | Thesis |
| Format | 118 p. : ill., maps |
| Rights | Stellenbosch University |
Page generated in 0.0026 seconds