Thesis (MSc)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Water loss in water distribution systems has been studied for many years in many countries and is
continuously leading to the development of new concepts and theories, publications, guidelines
and software models. Despite these developments, 45 % of water utilities in South Africa still do
not understand the extent of water losses in the distribution systems that they operate (Wegelin et
al., 2012:27). It is important, in terms of water services planning, that a realistic estimate of the
potential savings from individual water conservation and water demand management (WC/WDM)
measures is made as it impacts directly on water security and business matters. If the potential
savings were incorrectly or inaccurately calculated, additional resources might have to be
developed at short notice to be able to supply in the demand.
Advanced software models, such as BENCHLEAK, PRESMAC, SANFLOW, AQUALITE and
ECONOLEAK (McKenzie & Bhagwan, 2000) have been developed to quantify the extent of
physical and commercial losses in water supply systems. Similar advanced models are available
for estimating water demand. Such advanced models require numerous input parameters, each of
which needs to be described accurately. The predicament is that such complex models are often
simply not applicable in certain areas with limited resources and limited input data. In contrast,
robust guidelines that are relatively insensitive to input parameters are useful in developing
countries, where all input values for complex water demand models may be unavailable or
inaccurate. No robust method has yet been developed for estimating the potential water savings
that would result from WC/WDM interventions. A need thus exists to estimate water savings in a
robust way with relatively few inputs.
This guideline promotes the development of a robust WC/WDM strategy, based on a systematic
and pragmatic approach, which requires less initial funding and develops with time. The
methodologies developed by the Water Loss Task Force (WLTF) of the International Water
Association (IWA), were used to develop six basic steps, which need to be followed to develop a
WC/WDM strategy. During the six steps, the minimum requirements for implementing WC/WDM
will be defined, the current water losses and efficiencies will be determined, and potential targets
will be set based on national and international benchmarks. Once targets have been set, 20 key
interventions were identified to address water use efficiency, and commercial and physical losses.
The motivation behind each intervention is provided based on best practice, case studies and legal
requirements. The model ensures that the potential savings from the various interventions are sufficient to ensure that targets are achieved, and if not, that targets must be revised. The
potential savings from interventions are based on literature reviews and new formulas developed
as part of this guideline. The results from the various interventions would enable the water utility to
prioritise interventions. The guideline concludes with a flow diagram describing the methodology.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/96909 |
| Date | 03 1900 |
| Creators | Wegelin, Willem Adriaan |
| Contributors | Jacobs, Heinz E., Stellenbosch University. Faculty of Engineering. Dept. of Civil Engineering. |
| Publisher | Stellenbosch : Stellenbosch University |
| Source Sets | South African National ETD Portal |
| Language | en_ZA |
| Detected Language | English |
| Type | Thesis |
| Format | 103 page : illustrations |
| Rights | Stellenbosch University |
Page generated in 0.0023 seconds