Return to search

Air sampling of nickel in a refinery

Abstract
Air monitoring was conducted in a nickel base metal refinery to determine compliance with occupational
exposure limits. The hypothesis stated that levels of airborne dust may pose a risk to worker health if
compared to the relevant exposure limits. Exposure limits for nickel species are set for the inhalable
nickel dust fraction. Personal air samples, representative of three selected areas were collected in the
workers’ breathing zones, using the Institute of Occupational Medicine (IOM) samplers. Real-time
personal samples were collected randomly over a two-month period in three nickel production areas.
Filter papers were treated gravimetrically and were analysed for soluble and insoluble nickel through
inductive coupled plasma-mass spectrometry (ICP-MS). Measured concentrations were expressed as
time weighted average exposure concentrations. Results were compared to South African occupational
exposure limits (OELs) and to the threshold limit values (TLVs) set by the American Conference of
Governmental Industrial Hygienists (ACGIH) to determine compliance. Statistical compliance was also
determined using the National Institute for Occupational Safety and Health procedure as prescribed by
South Africa’s Hazardous Chemical Substances Regulations in 1995. In two of the areas it was found
that exposure concentrations complied with the OELs. Some exposures exceeded the OEL values and
most exposures exceeded the TLV values in the other area concerned. A comprehensive health risk
assessment needs to be conducted to determine the cause of non-compliance.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:tut/oai:encore.tut.ac.za:d1001468
Date25 June 2007
CreatorsHarmse, JL, Engelbrecht, JC
PublisherTaylor & Francis
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeText
FormatPdf
RightsTaylor & Francis
RelationInternational Journal of Environmental Health Research

Page generated in 0.0019 seconds