Return to search

Characterisation of coal slurries for introduction into ICP OES for multi-element determinations

The characterisation and stability of coal slurries for introduction into an inductively coupled plasma
optical emission spectrometer (ICP OES) and the application of slurries in the analysis of coal was
investigated. The importance of rheology and the stability of the coal slurries on the analytical results
produced by ICP OES was demonstrated. The homogeneity and stability of various coal slurries were
characterised by sedimentation tests, scanning electron microscopy (SEM), zeta potential and viscosity
measurements. The porosities and surface areas of different South African coals and a mechanism for
the adsorption of the dispersants onto the coals were determined using low-temperature nitrogen
physisorption studies. The possibility of partially solubulising the coal in N,N-dimethylformamide
(DMF) was investigated. SEM indicated that DMF solubulised coal fines and that 0.1% (m/v) Triton
X-100 with 10% (v/v) DMFresulted in well dispersed slurries relative to other dispersants (glycerol, PEI
and water). Slurry analysis of coarse and ground coal in 0.1% (m/v) Triton X-100, showed that higher
emission intensities and better precision was obtained when using ground coal. This was confirmed by
lower RSDs (less than 5% for most of the elements analysed) relative to the unground, coarse coal.
Glycerol slurries gave higher RSDs (higher than 5% for most of the elements) most of the time, thus
negatively influencing the precision of measurement. Physisorption studies indicated that ground coal
had up to ten times higher surface areas than coarse coal. The higher surface areas for fine ground coals
suggested why they were better dispersed and thus better transported into the plasma, resulting in
higher emission signals. Zeta potentials indicated that for all dispersants, the coal particles were well
repelled from each other, although SEM pictures indicated better dispersion for 0.1% (m/v) Triton
X-100 with 10% (v/v) DMF. It was demonstrated that higher intensities and higher precision could be
obtained with well dispersed and stable coal slurries.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:tut/oai:encore.tut.ac.za:d1001491
Date22 January 2009
CreatorsMujuru, M, McCrindle, RI, Panichev, N
PublisherElsevier
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeText
FormatPdf
Rights(C)The Royal Society of Chemistry 2009
RelationJournal of Analytical Atomic Spectrometry

Page generated in 0.0026 seconds