Includes bibliographical references (p. 122-129). / Efficient intracellular product release from yeast is required for the recovery of many bioproducts, recombinant or other. Traditionally such product release is achieved by non-selective, energy demanding mechanical disruption. The fine debris resulting from mechanical disruption is also challenging in the solid-liquid separation in downstream process. This study investigates the effect of the pretreatment on the energy efficiency of cell disruption, the extent of product release and its selective product release. Saccharomyces cerevisiae and Kluyveromyces lactis were used as the model microorganisms while disruption following pretreatment was achieved on exposure to ultrasound or passing through the high pressure homogenisation (HPH). Pretreatments were selected for their ability to weaken the yeast cell wall, rather than to permeabilise the cell. This allowed product release to be concentrated into the disruption step only, not distributed between the disruption and pretreatments steps. Rapid temperature treatment at 40 to 60CC, pH shock across the range pH 9 to 11 and osmotic pressure between 0.5 MPa and 5 MPa were used as single pretreatment. Combined pretreatments were also considered. These were affected by diluting the yeast suspension into a pre-warmed pH or high osmolarity buffer. On dilution, the temperature was increased rapidly to 40CC, while the pH or osmotic pressure was increased to pH 10 or 1 MPa.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/11884 |
| Date | January 2009 |
| Creators | Fan, Jia |
| Contributors | Harrison, STL |
| Publisher | University of Cape Town, Faculty of Engineering and the Built Environment, Centre for Bioprocess Engineering Research |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Master Thesis, Masters, MSc |
| Format | application/pdf |
Page generated in 0.002 seconds