Return to search

Local maximum entropy approximation-based modelling of the canine heart

Local Maximum Entropy (LME) method is an approximation technique which has been known to have good approximation characteristics. This is due to its non-negative shape functions and the weak Kronecker delta property which allow the solutions to be continuous and smooth as compared to the Moving Least Square method (MLS) which is used in the Element Free Galerkin method (EFG). The method is based on a convex optimisation scheme where a non-linear equation is solved with the help of a Newton algorithm, implemented in an in-house code called SESKA. In this study, the aim is to compare LME and MLS and highlight the differences. Preliminary benchmark tests of LME are found to be very conclusive. The method is able to approximate deformation of a cantilever beam with higher accuracy as compared to MLS. Moreover, its rapid convergence rate, based on a Cook's membrane problem, demonstrated that it requires a relatively coarser mesh to reach the exact solution. With those encouraging results, LME is then applied to a larger non-linear cardiac mechanics problem. That is simulating a healthy and a myocardial infarcted canine left ventricle (LV) during one heart beat. The LV is idealised by a prolate spheroidal ellipsoid. It undergoes expansion during the diastolic phase, addressed by a non-linear passive stress model which incorporates the transversely isotropic properties of the material. The contraction, during the systolic phase, is simulated by Guccione's active stress model. The infarct region is considered to be non-contractile and twice as stiff as the healthy tissue. The material loss, especially during the necrotic phase, is incorporated by the use of a homogenisation approach. Firstly, the loss of the contraction ability of the infarct region counteracts the overall contraction behaviour by a bulging deformation where the occurrence of high stresses are noted. Secondly, with regards to the behaviour of LME, it is found to feature high convergence rate and a decrease in computation time with respect to MLS. However, it is also observed that LME is quite sensitive to the nodal spacing in particular for an unstructured nodal distribution where it produces results that are completely unreliable.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/16963
Date January 2012
CreatorsRama, Ritesh Rao
ContributorsSkatulla, Sebastian
PublisherUniversity of Cape Town, Faculty of Engineering and the Built Environment, Department of Civil Engineering
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeMaster Thesis, Masters, MSc (Eng)
Formatapplication/pdf

Page generated in 0.0019 seconds