The objective of this thesis is twofold - (1) to design the unit processes for treating the waste from a specific industrial plant using the best practicable technology, and (2) to critically examine the theory of these unit processes for utilization in design. The industrial waste was derived from a synthetic button and textile trimmings factory producing polyester and casein buttons. The effluent has a high pH and COD; contains metallic poisons; and is highly coloured. It exceeds the limitations for effluent quality promulgated by the Cape Town Municipality before discharge to the sewers. A certain measure of pretreatment before discharge to the sewers was therefore required. The treatment process eventually selected consists of neutralization; flocculation; sedimentation; sand filtration of the sludge; and atmospheric drying of the sludge.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/18032 |
| Date | January 1971 |
| Creators | Greenblau, Norman |
| Contributors | Marais, Gerrit van Rooyen |
| Publisher | University of Cape Town, Faculty of Engineering and the Built Environment, Water Research Group |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Master Thesis, Masters, MSc (Eng) |
| Format | application/pdf |
Page generated in 0.0025 seconds