Return to search

The Application and interpretation of linear finite element analysis results in the design and detailing of hogging moment regions in reinforced concrete flat plates

Structural engineers have used finite element methods for the design of reinforced
concrete plate type structures for decades. The theory behind this method is well
researched, however, there is still a lack of direction on how to use the information
obtained from this type of analysis to practically design reinforced concrete structures
for strength and serviceability criteria.
The literature study reviews the analysis of concrete plate type structures using
traditional and finite element methods and highlights the difference between linear and
non-linear finite element analysis. It is apparent that when designing and detailing
using a FE analysis, a great deal is left up to engineering judgement, especially in
areas of the structures where peak load effects (singularities) are experienced. In this
thesis these peak areas are investigated, in an effort to provide insight into the actual behaviour of the structure as opposed to the theoretical results obtained from a FE
analysis.
The research consists of both numerical, (linear and non-linear FE analyses) and
practical experimental work performed on different types of concrete plate type
structures, including concrete pad foundations and simply supported flat slabs. The
response to loading, i.e: cracking characteristics, softening of the concrete, moment redistribution, variation of the strain in reinforcement across the section, and deflection
is observed and discussed.
The results show that the traditional simplified methods are adequate with respect to
overall strength. Finite element peaks or singularities may be averaged or smoothed
without compromising durability and serviceability. Suggestions on how the
reinforcement obtained from linear finite element methods be detailed are given. / Dissertation (MEng)--University of Pretoria, 2013. / gm2014 / Civil Engineering / unrestricted

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:up/oai:repository.up.ac.za:2263/40823
Date January 2013
CreatorsSkorpen, Sarah Anne
ContributorsDekker, N.W., sarah.skorpen@up.ac.za
PublisherUniversity of Pretoria
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeDissertation
Rights© 2013 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria.

Page generated in 0.0023 seconds