Return to search

Electrochemical actuation potential of diaminophenazine linked pyrrole derivatives

>Magister Scientiae - MSc / A novel monomer (Phenazine-2,3-diimino(pyrrole-2-yl)–PDP) derived from the condensation reaction between 2,3-diaminophenazine and a pyrrole derivative has
been synthesized as a hinge molecule in the design of a zig-zag polymer with actuation
possibility. The monomer was polymerized chemically and electrochemically to produce
the new polymer material – polymerized Phenazine-2,3-diimino(pyrrole-2-yl) PPDP.
Two very crucial properties of a good actuator material, relate specifically to its
solubility testing and electrical conductivity. The hinged polymer material was studied
intensively in terms of its spectroscopy; Fourier Transform Infrared - FTIR, 1H’NMR,
thermal properties (Differential Scanning Calorimetry-DSC and Thermogravimetric
Analysis-TGA) as well as voltammetry and conductivity. Conductivity was evaluated
using three different approaches including; 4 probe measurements, plotting of I/V
curves based on potentiostatic measurements and an electrochemical impedance
experiment using a dielectric Solartron interface. Electrochemical kinetics of the
polymer prepared as a thin film at glassy carbon electrode (GCE) was also done and it
was clear that the thin film conductivity was vastly different from the compressed pellet
conductivity (thick film). The zig-zag polymer was then further modified by homogeneous inclusion of gold nanoparticles to improve conductivity and solubility, in
the thick film arrangement. Conductivity of the thin film was studied by electrochemical
impedance spectroscopy with the relative charge transfer values being determined for
unmodified and modified polymer systems. The solubility testing of the material plays
an important role as it is required for a wide range of experimental applications. The
zig-zag polymer showed great promise for applications; in dye sensitized solar cells and
free standing interpenetrating polymer network (IPN), solubility testing and electrical
conductivity would need to be improved in order to be used in these applications.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uwc/oai:etd.uwc.ac.za:11394/3823
Date January 2013
CreatorsWard, Meryck
ContributorsBaker, Priscilla
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
Rightsuwc

Page generated in 0.0023 seconds