Return to search

Flow Characterisation of An On-Line Electrochemical Analyser

Student Number : 9900280X -
MSc (Eng) dissertation -
School of Chemical and Metallurgical Engineering -
Faculty of Engineering and the Built Environment / The flow characteristics of an on-line analyser were measured using a
stimulus – response technique. The analyser was developed for
monitoring homogeneous catalyst concentrations in a non-aqueous
solution and it was considered important to limit dispersion effects
between sample injection and measuring points. Various tube lengths
between these points were used and the system was operated over a
range of flow rates. The detectors employed were electrochemical in
nature and of two different designs.
The residence time distributions of the system were determined
experimentally and analysed by the method of moments and frequency
techniques. As expected dispersion of the sample decreased as tube
length decreased and flow rate increased.
An attempt was made to fit the experimental results to the axially
dispersed plug flow model. This was only successful over a limited range
of the variables.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:wits/oai:wiredspace.wits.ac.za:10539/1662
Date14 November 2006
CreatorsShaik, Mohammed Nadim
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format8078478 bytes, 220946 bytes, 36218 bytes, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf

Page generated in 0.0015 seconds