A Dissertation for the Master’s Degree in Mechanical Engineering
School of Mechanical, Industrial & Aeronautical Engineering
Date: 02/02/2017 / The Friction Stir Welding process is a rotating tool, that consists of a specialy designed shoulder and pin, that
is plunged into the joining line of the required material and traverses along this line. The friction is induced by
the rotating tool causes the workpiece material to rise to an operating temperature of 70% to 90% of the
workpiece material's melting temperature and resulting in, no phase change, nor any defects associated with
phase change, occurs in the workpiece. The increased temperature of the material causes the shear yield
strength to drastically decrease thus allowing the two pieces to plasticise, easily stir around the tool and subsequently
join. As the tool traverses along the workpiece, the softened material cools in the wake of the
rotating tool and recrystallises, forming a ne grained microstructure.
Attempts to develop an innovative tool to correlate the resulting of thermal models with process parameters
are scarce. In this work, 6056-T4 and 6082-T6 Aluminum alloy sheets are friction stir welding at different
rotational and translational speeds during the experimental aspect and material 2024-T3 for the analytical
calculations. The effects of process parameters on the resulting thermal and mechanical properties are
investigated. The results show that the use of coolant during the friction stir weld decrease heat generation
substantially, this can also affect the force of the weld. It is also observed that the shear strenght of the
processed sheet depends strongly on the rotational and translational speeds as weld as the thermal aspect and
varies widely within the processed region, this was shown in this study by evaluating the thermal aspects of
different weld types namely the Standard tool, Bobbin tool and the innovative tool. In addition. The proposed
approach involves determination of the use of the friction stir welding in different thermal conditions and
championing the use of an innovative tool. / MT2017
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:wits/oai:wiredspace.wits.ac.za:10539/22966 |
| Date | January 2017 |
| Creators | Uslu, Mehmet Yildirim |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | Online resource (xxiv, 310 leaves), application/pdf |
Page generated in 0.0577 seconds