The aim of this work is diagnostic of plasma chemical deposition thin films based on organometallic precursors. Thin layers have recently become one of the most used methods for surface treatment of materials. They are used as a protective, functional layer, they improve surface properties of materials or increase or reduce the adhesion to various compounds. Plasma polymers are a modern trend in surface treatment technology. Their structure is different from classical polymers. The titanium (IV)isopropoxide was chosen as a monomer example, which is frequently used as a monomer for photocatalytic TiO2 films plasma deposition. These thin films are very promising for the removal of various air and water pollutants and thus they can significantly help in the increase of the environmental quality. Measurements took place on a commercial device Plasmatreater AS 400. The theoretical part describes the background needed for the study and diagnostics of plasma processes and technologies. The optical emission spectroscopy was chosen as a diagnostic method, and thus its principles are outlined in the theoretical part. Infrared spectroscopy and X-ray photoelectron spectroscopy were applied for the diagnostics of prepared thin films and they are also described in the theoretical part. The experimental part contains two sections. The first section is dedicated to the plasma diagnostics by optical emission spectroscopy. Discharge was generated in nitrogen or in the air. Measurements were performed at seven different duty cycles and at two different flow rates for each of the working gases. The molecular bands of nitrogen first negative and second systems, CN violet bands, and atomic lines of oxygen and nozzle elements (Cu, Cr) were identified in the spectra. The titanium lines, and bands of TiO were determined if the precursor was added. Electron temperature was calculated using chromium lines, and electron temperature maps were obtained for continuous mode and pulse mode with duty cycle 70% for nitrogen plasma with 500 sccm precursor flow. Similar discharge maps were also processed using the selected line of titanium (520 nm) TiO band (625 nm) again for the same discharge conditions. Furthermore, the dependences of the same quantities were obtained along the discharge axis as a function of duty cycle in both gases with precursor flow of 1000 sccm. The second part of results brings material analyzes of the deposited samples. The peaks of anatase and rutile have been identified by infrared spectroscopy. Using X-ray photoelectron spectroscopy, we found that our layers contain a significant amount of non-dissociated precursor. Moreover, a large number of radicals, which can interact with atmospheric gases, was determined on the surface. These radicals are removable by annealing or by ion etching. All results obtained during this research can significantly help us to improve the quality of deposited layers and allow us also some prediction of the thin film properties at given plasma conditions. Of course, further experimental as well as theoretical studies should be completed to obtain complete knowledge needed for the wide applications of these layers.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216685 |
| Date | January 2011 |
| Creators | Sahánková, Hana |
| Contributors | Dvořák, Pavel, Krčma, František |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds