Return to search

Enzymatická hydrolýza odpadní lepenky s využitím metody SSF - zdroj suroviny pro výrobu kapalných biopaliv. / Enzymatic hydrolysis of waste cardboard using the SSF method - a source of raw materials for the production of liquid biofuels.

This master’s thesis discusses the useof enzymatic hydrolysis process of waste cardboard using simultaneous saccharification and fermentation (SSF) as a source of raw materials for production of liquid biofuels. This thesis is based on theses written by Ing. Brummer and Ing.Lepař.Thus, results gained in these works have been used and also further developed. The theoretical part summarizes the reasons for further development of SSF method and discusses, as well, the achievements reached in the processing of lignocellulosic waste materials by the SSF method so far.This section also discusses the general characteristics of lignocellulosic materials and also of the cellulolytic enzymes. It focusses also on individual pretreatment methods of lignocellulosic material and options of increasing the yield of the whole process. The experimental part verifies the particular results reached in previous theses and at the same time a further optimization of the method has been carried out because of the transfer of the whole process into a fermenter. Cardboard was set as the substrate for the experiments as it was evaluated by Ing. Brummer as the best one for enzymatic hydrolysis which was carried out by enzymes from Novozymes®. Parameters such as temperature, pH and kind of used buffer, the loading concentration of substrate and enzymes, were set according to the thesis of Ing. Lepař, which was aimed to their optimization. The SSF process done in fermenter of 2.0 l volume confirmed the previous results and furthermore it has been more effective through optimization of the added inoculum volume. It has been confirmed that the best substrate is cardboard finely grinded by vibrating mill. Also experiments with added nutrients had been done as an effort to increase the ethanol concentration, but these haven’t resulted insatisfying results. The maximal concentration of ethanol was 23,49 g/l, which was achieved after further optimization of various conditions. This result equals to experimental yield of 84,79 %.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216926
Date January 2013
CreatorsHlaváček, Viliam
ContributorsStloukal, Radek, Gabriel, Petr
PublisherVysoké učení technické v Brně. Fakulta chemická
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds