This master’s thesis is about design and realization of a digital controlled power supply. In the introduction there is defined a basic princip and division of the power supplies. Furthermore, there are considered two design realisations of digital controlled power supllies. The first one will be controlled by D/A converter and the second one will be controlled by digital potentiometers. Consequently, there is in the master’s thesis designed controlled part which controls output parameters of supply. The core of the controlled part is microcontroller ATmega16. Output parameters are displayed on LCD display and are set by 4x4 matrix keypad. In the last part there is designed connection between PC and microcontroller by the help of converter FT232BM. Subsequently, there is designed the rectifier with a filter and electronic switching of the fan. At the end of the thesis is resolved the placement of the various component parts to the component box.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218406 |
| Date | January 2010 |
| Creators | Kocián, Daniel |
| Contributors | Koton, Jaroslav, Šotner, Roman |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds