This work describes a model of a house elevator with an EC motor ( Electronically Commutated Motor) and a programme essential for controlling of the model and adjusting of the protective features for a safe operation. The work deals with experimental measurement based on the model, firstly while being at idle run, and then while being loaded. It is focused on the identification of influencing the EC motor input by usage of the counterweight. The aim of the work is to process the measured data, which are then used for mechanical adaptation of the model and the consequent confrontation between the measured data gained before and after the adaptation. Also an important part of the work is the simulation of the elevator using the 3D SolidWorks Programme.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228115 |
| Date | January 2008 |
| Creators | Kalina, Martin |
| Contributors | Feiler, Zdeněk, Koláčný, Josef |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds