The graduation thesis is focused on the automatic operating of heating of the production hall of První brněnská strojírnaVelká Bíteš, a.s. The thesis consists of an analysis of present state of the heating technology and solution of the general conception of the automatic operating of the heating. Integrated part of the conception is heat-up of the supply water and drain off of the condensation water from the air heating units. Outcome of this graduation thesis is a design of the algorithm for operating of the regulated system. Remote supervision and control of the regulated system shall be ensured by the visualization setting, which shall be implemented into the station of dispatching centre. The accuracy of the design of the part of regulated system shall be validated as a design of PID regulator with the use of “Matlab” program and it´s module “Simulink”. To set up parameters of the PID regulator, “Ziegler-Nichols” method shall be applied. The objective pay-off period of investments for regulation controlling system is figured out as a part of this thesis as well.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228999 |
| Date | January 2010 |
| Creators | Prudek, Miroslav |
| Contributors | Voldán, Jiří, Němec, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds