Study developed during the Master's degree studies of Mechanical Engineering deals with the use of recycled plastic in the injection molding and its influence on the mechanical properties of the mold. Examined product is used in the automotive industry as a connector body. The housing is manufactured from a plastic material, polyamide. The annual production volume of 3 000 000 pieces. According to tests specified in standard USCAR2 regrind influence on mechanical properties and dimensions was evaluated. After the technical evaluation of the project, research was also judged from economic point of view. In this task, savings with the different content of the recycled material during production was calculated. The final chapters justify change of properties and they are proposing the use of recycled materials in practice.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241178 |
| Date | January 2016 |
| Creators | Brhel, Michal |
| Contributors | Sedlařík, Vladimír, Kandus, Bohumil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds