The adhesion in the wheel-rail contact can be effectively controlled by using the friction modifier. Adhesion control can reduce excessive wear of the contact bodies or noise. The essence of this diploma thesis is to determine the optimal amount of friction modifier in wheel-rail contact depending on the climatic and operating conditions. For experimental study of the behavior of the friction modifier, the twin-disc device is used. Twin-disc simulates and controls the most important operating parameters such as speed, slip, attack angle or contact pressure. On the basis of these findings, the off-board top-of-rail lubricator system was designed. This system controls the amount of friction modifier according to current climatic and operating conditions.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318387 |
| Date | January 2017 |
| Creators | Knápek, Jiří |
| Contributors | Dzimko, Marián, Galas, Radovan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0058 seconds