The aim of this master’s thesis was to describe the basic measurement methods for measurement of inertial sensor, their physical principles and errors. The next step was to select a specific parameter, then test it on a number of sensors and evaluate the results. Measurement of inertial sensors is very important for the parametrization of their errors and their subsequent mathematical model by which it is possible to minimize their impact on inertial navigation. The practical part is dedicated to the measurement of stability of the offset. Data acquisition card NI-USB 6215, which can supply two accelerometers at the same time using analog outputs, was used for data acquisition and power supply. It was tested on seven inertial sensor from four manufacturers. Two connection methods with NI-USB 6215, by whose it was determined which one is better to suppress the crosstalk between channels, were used for measurement. The NI PXI 4462 was used to verify that the NI-USB 6215 card is sufficient. The parameters for description of the changes in inertial sensors were established, transition between the initial and final value of the output measurement, variance of the values on which the sensor fixates after 72 iterations, and the fixation time of the sensor.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:374611 |
| Date | January 2012 |
| Creators | Mihaľko, Juraj |
| Contributors | Rášo, Peter, Beneš, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds