In the thesis the design of the Data Storage System (DSS) is proposed with the respect to the V-Model methodology. The design is based on users requirements, from which the system requirements are created and the technical specification of the DSS is developed. In the technical specifications the functionality of the DMM and HMI DSS subsystems are described and sub-system requirements are assigned to them, then they are subdivided and assigned to individual DMM (Data memory module) and HMI hardware items. Moreover, requirements are analyzed on hardware items, specific electronic components, are selected and implemented into the block design of the DMM hardware. Based on the block design of hardware, the hardware of the DMM subsystem is designed, selectively simulated and implemented along with the printed circuit board. On the implemented hardware of the DMM subsystems measurements are performed in order to verify the basic functionality of the hardware and the calculated, assimilated and measured values are compared as well. At the end of the thesis there is a short description of the implementation of the software design and its use for basic initialization of the selected processor, together with the verification of its basic function - measuring the frequency of the internal clock sources and the clock domains. The work is completed by sending a message of defined parameters to the selected communication line and sapling it by an oscilloscope, so that the basic function of the DMM subsystem is verified.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:376993 |
| Date | January 2018 |
| Creators | Kotulič, Dominik |
| Contributors | Novák, Lukáš, Šteffan, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds