In this thesis is studied the influence of arc TIG preheating during laser welding of 2 mm Hardox 450 material sheets. This material achieves its good mechanical properties by processes of heat treatment. That causes problems during welding because of heat degradation. Experimental sheets were welded within various configurations of welding parameters and positions of TIG nozzle. Testing specimens were cut out by laser and were used for tension testing, Vickers hardness testing and metallographical testing (macro and microstructure). The results of using the second heat source are: wider heat affected zone, smoother transitions among its zones, reduction of toughness and hardness, finer grain structure and occurring ferritic microstructure. This hybrid technology, combination of laser welding and TIG preheating, is very productive creating joints with greatly good quality. The thesis also contains a comparison with common MAG welding method.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:379020 |
| Date | January 2018 |
| Creators | Debs, Martin |
| Contributors | Kubíček, Jaroslav, Mrňa, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds