This dissertation thesis concerns with Analysis of Influence of Collagen Organization on Mechanical Properties of Arteries and it is divided into three main parts. Motivation for this dissertation thesis was in a study reviewing effect of material model upon resulting stresses in AAA. The effect was calculated in 70 patient-specific geometries of AAA, which exceeds the number of geometries in other scientific papers by one order. Within this study, two material models were used, i.e. real one and 100× stiffer, and obtained stresses were mutually compared. It was quantified that peak stress difference can be higher than 20 % in 10% of patients and therefore the real material model should be preferred over the artificial one although operation with this model is more demanding. The second part of this thesis deals with an identification of structural parameters (orientation and dispersion of collagen fibres) of porcine aortic tissue by using adjusted Fast Fourier Transform based algorithm. The extracted structural parameters were inserted into two-layer structure-motivated constitutive model Martufi-Gasser. This model was validated and its predictive capabilities were also tested with fine results. The most important information obtained from the digital image processing of ~9000 micrographs is existence of only one family of dispersed collagen fibres which breaks the current dogma present in many scientific papers about two families of collagen fibres. The third part concerns with a proposal of an automated phase-correlation based algorithm for obtaining collagen fibre direction from polarized light microscopy images. The proposed algorithm was verified and validated and it yields histograms of collagen fibre directions with overall number of measured points larger than it would be possible to get from any manual measurement. The limitation of the original proposed algorithm is in 90° period of polarized light intensity, thus the method results in angles in the range of 0°–90. Therefore the end of the thesis is dedicated resolving this problem and obtaining real angles in a span of 0°–180°. To this end, the microscope set-up was changed and the algorithm was adjusted accordingly. The original and the adjusted algorithms are collagen-specific, fast and an operator independent. Despite all the author´s effort put into collagen fibre waviness quantification directly from the histograms, the waviness has not been quantified yet in this way and it remains at the stage of research.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:383532 |
| Date | January 2018 |
| Creators | Novák, Kamil |
| Contributors | Daniel, Matej, Vimmr, Jan, Burša, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.1244 seconds