Thesis is focused on analyzing the influence of preheating process parameters using electric arc from TIG torch during laser welding on weld properties of stainless steel and carbon steel with higher strength. In this thesis experiment was done in which metal sheets 3 mm thick from X12Cr13 and S355 steels were welded. Welding was done first with using only laser, then laser with TIG preheating and lastly laser with preheated material by induction heater. When TIG preheating was used than set welding current was changed on the power source. The welds were subsequently evaluated based on macrostructure, microstructure and Vickers hardness test.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400985 |
| Date | January 2019 |
| Creators | Žák, Tomáš |
| Contributors | Beran, David, Mrňa, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds