Return to search

Výměna tepla v trubkových výměnících / Heat transfer in the tubular exchangers

Shell and tube heat exchangers and their use in cooling processes are the major topic of this thesis. The theoretical part of the thesis starts with the mechanisms of heat transfer and then deals with shell and tube heat exchangers. Their position, design specifications and equations for calculations are given. In the experimental part, the heat transfer on semi-operating shell and tube heat exchangers with baffles and glass or silicon carbide heat exchange surface is examined by cooling the humid air by 50% propylene glycol in tubes. For four or five coolant flows and three airflows, input and output flow temperatures including relative air humidity were measured. Differences in exchanged heat between the exchangers were negligible due to the low local air heat transfer coefficient, although silicon carbide has two orders of magnitude better thermal conductivity than glass. Much higher efficiency was performed by the carbide heat exchanger because the difference between air outlet temperature and liquid inlet temperature was one and half times higher for the glass heat exchanger. That was reflected in a decrease in mean temperature difference, which resulted in a 16 % higher experimental heat transfer coefficient compared with the glass surface. The theoretical model using the j factor, the correction factors for the baffles, and the correction for air humidity condensation have proven to be appropriate. For the glass surface, for the highest air flow rates the model gives an appropriate heat-transfer coefficient; at lower flow rates it gives slightly higher values. For the silicon carbide surface, it gives a lower heat-transfer coefficient because the model failed to consider a lower mean temperature difference. The results also evaluate the heat loss through the shell and the heat exchanged in addition by air humidity condensation.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401835
Date January 2019
CreatorsHorvát, Petr
ContributorsKrištof, Ondřej, Svěrák, Tomáš
PublisherVysoké učení technické v Brně. Fakulta chemická
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.002 seconds