This thesis deals with the usage of arc preheating for welding high strength boron enhanced steel 22MnB5 using hybrid technology known as laserTIG and also its impact on the final weld compared to welds welded by only the laser or the arc method. During the experiment I welded five sheets of the above mentioned steel 1,3 or 1,9 milimeters wide. Except for the welds fabricated by the laser and the TIG method was the only variable the electric current of the arc (I = 20, 40, or 60 A). Welds welded this way were compared based on strength limits measured by the tensile tests. Additionally were they compared according to the metalographic survey and the progress of weld hardness, calculated using the Vickers hardness test.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:402499 |
| Date | January 2019 |
| Creators | Kachlíř, Jaromír |
| Contributors | Šebestová, Hana, Mrňa, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds