To optimize production at Tyco Electronics Czech s.r.o. I designed and implemented an automated classification cell with a collaborative manipulator Universal Robots UR5e and a Cognex camera system. The classification cell is supposed to pick up the loose parts and then optically test them, sorting the parts into output binders following the inspection results. First of all, I had to learn programming language for Universal Robots manipulators and Cognex vision system. Next step was to design and draw an electrical diagram. According to the diagram, I connected the cabinet and other peripherals. I also programmed an algorithm controlling the manipulator arm and inspecting of both cameras. Finally, I successfully tested the functionality of the entire classification cell.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:413200 |
| Date | January 2020 |
| Creators | Lahoda, Vlastimil |
| Contributors | Chromý, Adam, Burian, František |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds