This diploma thesis deals with the thermodynamic design of a backpressure steam turbine. The mass flow of steam through the turbine is determined based on the required heat output, which is transferred in a heat exchanger at the turbine outlet. The governing stage of the turbine is in form of an impulse stage, with optimization of degree of reaction included. During the optimization, a suitable rotor blade was chosen as well as its size. The governing stage is followed by fifteen stages of reaction blading with the stage loading coefficient in the range of 2,75 to 2,80. The governing stage and the reaction blading both meet the mechanical strength requirements. Balancing piston, sealing system and bearings are also designed. Finally, a turbine characteristic is created as well as a longitudinal section. The designed turbine has a speed of 10 000 rpm. While supplying the required heat output, it has a terminal power output of 5 863,4 kW and a thermodynamic efficiency of 84,69 %.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443163 |
| Date | January 2021 |
| Creators | Tretera, Michal |
| Contributors | Fiedler, Jan, Kracík, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0027 seconds