The objective of this thesis is to check the preciseness of the total station Leica TC(R) 407 ser. No.660021 by using the defined methods. The data collected through measurements and by the computation procedures according to the relevant standards and the proceedings described by the professional literature were compared with the data stated by the manufacturer. The accuracy of the telemeter and the goniometric part of the device was tested. The theoretical part of this thesis is focused on the basic measurement methods and distance determination, principle of the electronic direction measuring and the error theory. The practical part of the thesis is focused on checking the accuracy of the measured horizontal direction and the zenith angle, as well as checking the preciseness of the telemetric part of the device. As a result the standard deviations of the measured distances and directions have been determined.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:51274 |
| Date | January 2009 |
| Creators | ŽIŽKOVÁ, Eva |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds