Return to search

[pt] CONCENTRAÇÃO DE TENSÕES EM PLACAS E EIXOS COM ENTALHES EM U SUBMETIDOS A ESFORÇOS COMBINADOS UTILIZANDO TÉCNICAS FOTOELÁSTICAS / [en] DETERMINATION OF STRESS CONCENTRATION FACTORS FOR BARS AND SHAFTS UNDER COMBINED LOADING USING FOTOELASTICITY

[pt] Foram determinados experimentalmente fatores de concentração de tensões teóricos para placas e eixos com entalhes simétricos e circunferenciais em U sujeitos à combinação de esforços de flexão e tração, para as placas e, flexão e torção para os eixos. Os fatores obtidos foram plotados em gráficos para comparação com fatores determinados aplicando-se o princípio da superposição. Foram utilizadas as relações geométricas D / d = 1,5; 1,25; 1,10 e r/d = 0,30; 0,25; 0,20 para as placas. Para os eixos utilizaram-se apenas as relações 0/d = 1,3 e r/d = 0,25. Também foram obtidos fatores de concentração de tensões para os esforços puros e seus valores comparados com resultados já publicados.
Os resultados para as placas foram obtidos a partir da fotoelasticidade bidimensional. Foi empregado o método fotoelástico tridimensional de congelamento de tensões para os eixos. Neste caso, os modelos foram cortados em finas fatias para separação das tensões. Para o estudo tridimensional foi utilizado um material desenvolvido no laboratório de Fotomecanica da PUC-RJ. / [en] Theoretical stress concentration factors were determined experimentally for bars and shafts with symmetrical and circunferential U – shaped grooves subjected to combinations of bending – tension loads for the bars and bending – torsion loads for the shafts. The stress concentration factors obtained were plotted to compare with the factors determined by application of the superposition effects. The geometric relations used for the bars were Dd = 1,5; 1,25; 1,10 and rd = 0,30; 0,25; 0,20. The geometric relations used for the shafts were Dd = 1,3 e rd = 0,25. The stress concentration factors were also determined for single loaded specimens and they were compared wuth data already published.
The stress concentration factors for the bars were determined by the two – Dimensional photoelastic method. In the case of the shafts they were determined by the three – Dimensional photoelastic Method of stress Freezing. In this method, the models developed in the laboratory of Photomechanics of the Universidade Católica.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:18608
Date31 October 2011
CreatorsJOSE LUIZ DE FRANCA FREIRE
ContributorsHENNER ALBERTO GOMIDE, HENNER ALBERTO GOMIDE, HENNER ALBERTO GOMIDE, HENNER ALBERTO GOMIDE
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0023 seconds