Return to search

Methods for analyzing wall slip in the die of a capillary rheometer

Wall slip in the die of
a capillary rheometer was investigated. Corn meal and water were mixed to a
moisture content of 35% wet basis. Oil was then added at 0%, 2.5%, and 5% of
the total mass. A capillary rheometer was used to extrude the mixture at 100C. Three
die diameters were studied: 2mm, 4mm, and 8mm. Two length to diameter ratios
were studied: L/D=4 and L/D=8. Pressure and flow rate in grams per 30 seconds
were collected from the capillary rheometer to perform the Bagley correction,
determine the flow behavior index, and correct for slip using the Mooney slip
analysis method. Several slip analysis methods were considered prior to the
selection of the Mooney method. Overall, the Bagley correction was successful
for all die diameters except 2mm. The Mooney method was successful for the 5%
added oil content samples. An increase slip velocity was observed as shear
stress increased. Mooney plots for 0% and 2.5% resulted in negative shear rate
values. An empirical model was developed to predict apparent viscosity of the
mixture as a function of total oil content.

  1. 10.25394/pgs.11328563.v1
Identiferoai:union.ndltd.org:purdue.edu/oai:figshare.com:article/11328563
Date06 December 2019
CreatorsAlyssa Shirley Christoffer (8088704)
Source SetsPurdue University
Detected LanguageEnglish
TypeText, Thesis
RightsCC BY 4.0
Relationhttps://figshare.com/articles/Methods_for_analyzing_wall_slip_in_the_die_of_a_capillary_rheometer/11328563

Page generated in 0.002 seconds