Return to search

<b>Automation of the Quality Control Process with the use of robotics and a coordinate Measuring Machine</b>

<p>The purpose of this research experiment was to explore and implement a cost-effective automation solution into a low volume production line for loading parts onto a coordinate measuring machine (CMM) for dimensional inspection. Quality control practices have historically been separated from production process by inspection routines being performed in a controlled lab. The system demonstrated the possibilities of an in-process automation of the quality control process that was feasible to be implemented for small and mid-sized manufacturing companies. The process involved an APSX horizontal injection mold machine dispensing parts onto the conveyor belt. The conveyor belt was controlled by a Phoenix Contact PLC and two line sensors that provided two stopping point for cooldown before inspection. A MyCobot 320-M5 robotic arm was used to select the part off the line and places it into a fixture on a Hexagon coordinate measuring machine (CMM).</p>

  1. 10.25394/pgs.23782497.v1
Identiferoai:union.ndltd.org:purdue.edu/oai:figshare.com:article/23782497
Date02 August 2023
CreatorsAlexander G Hoang (16677327)
Source SetsPurdue University
Detected LanguageEnglish
TypeText, Thesis
RightsCC BY 4.0
Relationhttps://figshare.com/articles/thesis/_b_Automation_of_the_Quality_Control_Process_with_the_use_of_robotics_and_a_coordinate_Measuring_Machine_b_/23782497

Page generated in 0.002 seconds