<p>The
fundamental design of axial compressors has matured to an exceptional level of
performance due to a century of research. With the improvements in efficiency
becoming increasingly difficult, attention continues to be channeled towards
understanding and reducing secondary losses such as hub or tip clearance
leakages, seal leakages, etc. Studies detailing the impact of seal leakages are
relatively scarce due to difficulties of obtaining data in the complex rotating
geometries of a high-speed compressor cavity. While the impact of seal leakages
on primary passage is readily available, details inside the cavity geometry is scarce
in open literature because majority of the investigations have been performed on
linear cascades with slots machined as cavities or standalone labyrinth seals that
fail to provide a wholesome understanding of the leakage flow and windage
heating in the rotating geometries.<br></p>
<p> Therefore,
the principal objective of this work is to investigate flow physics in the
stator cavity wells for understanding the flow path of the leakage fluid and windage
heating within the cavity. A parametric model of the Purdue 3-Stage Compressor
(P3S) is used to allow for rapid geometric modifications to the seal clearances
in a coupled stator-cavity system. The investigations presented here consist of
a series of numerical simulations using ANSYS CFX as the primary Computational
Fluid Dynamics (CFD) tool. Measurements performed by previous investigators are
utilized to define the boundary conditions of this model. This study’s goal is
to characterize the interdependence of parameters such as cavity leakage flow
rate, circumferential velocity, and windage heating for understanding the flow
structure inside the cavity wells and their impact on cavity temperatures. Data
acquired is intended to reveal mechanisms through which cavity leakage flows
affect the stator passage aerodynamics and the windage heating, both regarding
their effect on the compressor performance and the details of the flow path
within the cavity. Consequently, this will provide insight into how the complex
cavity leakage flow influences the design considerations for optimizing stator
passage aerodynamics and minimizing stator cavity heating.</p>
<p>The compressor operating conditions
of Nominal Loading (NL) is the focus of this CFD work since the flow field at
High Loading (HL) has significant boundary layer separation. NL is closest to
both the design and peak efficiency conditions where the compressor would spend
the majority of its time in operation, understanding cavity flow physics at
this operating condition would have a direct impact on enhancing the overall
compressor performance. A CFD model of the standalone primary passage is
developed first using the dataset available from experiments performed by
previous investigators for establishing confidence in the primary passage flow
physics. Therefore, detailed total pressure, total temperature, velocity, and
flow angle data collected behind each blade row is utilized for validating the
primary passage flow in the CFD model. After validating the primary passage
model, measurements in the coupled cavity model are acquired to understand the
flow variations as well as temperature development in the cavity due to the
varying labyrinth seal clearance.</p>
<p>The investigations in this work are
divided into two distinct branches. First, to aid the aerodynamic research
community, the flow structure inside the cavity wells is investigated to
understand the impact cavity leakage flow has on the compressor efficiency and
on its interactions with the primary flow path. Secondly, for understanding the
development and rise of temperature in the cavity wells, i.e., the windage
effect, are performed to aid the thermo-mechanical research community so that
the material choices and stress analysis of the cavity components can be
optimized. Hence, the trends in the data acquired provide the aerodynamic,
mechanical, and secondary flow system designers an indication of the
complexities of the flow within shrouded stator cavities and provide insight
into designing and optimizing more complex geometries.</p><p>Results from this investigation describe how increasing seal clearance deteriorates the stator performance and enables the cross-passage migration of low momentum fluid to worsen hub corner separation. The simulations also state the case for re-ingestion at tight seal clearances as the 3D streamlines show heated efflux emerges from the upstream cavity interface, dwells near the hub, and gets recirculated back into the cavity inlet well. Radial variations inside the cavity wells show high cavity temperatures with excessive cavity due to re-ingestion, while the cases that avoid re-ingestion are observed at the lowest temperatures. These radial variations also identify the cavity leakage flow path and the development of circumferential velocity. Lastly, the total pressure loss, total temperature rise and windage heating, all show a strong dependence on circumferential velocity development, which is inherently dependent on the labyrinth seal clearances.<br></p>
| Identifer | oai:union.ndltd.org:purdue.edu/oai:figshare.com:article/7392788 |
| Date | 04 January 2019 |
| Creators | Nitya Kamdar (6012222) |
| Source Sets | Purdue University |
| Detected Language | English |
| Type | Text, Thesis |
| Rights | CC BY 4.0 |
| Relation | https://figshare.com/articles/Computational_Investigation_of_Cavity_Leakage_Flow_and_Windage_Heating_Within_an_Axial_Compressor_Stator_Well/7392788 |
Page generated in 0.0042 seconds